how do i wire up my inverter

[jlf]

hi does anyone know how i can wire up my inverter cause my cig lighter don't work so is the away around that????

[Saxo-Slag]

Does it have like clip things on the end off it or is it just a plug in ciggy jobby

[jay]

open the plug up, unscrew the wires from the plug and separate them and wire them up to ur battery

[Saxo-Slag]

Mine just clips onto the battery. Its easy this way because i can take it out with in seconds

[jlf]

can't do that it say's in the manual yeh but for over 350 watts

[jay]

why doesnt ur cig lighter work? may be the fuse?

[Saxo-Slag]

I would try fix the cig lighter first

[jlf]

how i duno how too and it goes on for a sec then goes off duno wtf is wrong with it :@

[mehmeh]

If you're going to keep it as semi-perminant then the best thing to do is run a wire from the battery. It's a piece of p*ss to do in the saxo, just use the grommet behind the glovebox. The only problem is that it will not turn off with the ignition, you caqn overcome this pretty easily with a relay is it's a problem.
Other than the ciggy lighter there isn't really anywhere else to take it from unless there are some free slots on the fusebox, you can't use the HU wiring because the current draw is wayy too high.

[Ma5on]

cut the cables and then hard wire them to the cig lighter postive and negative that way its fused and is also permanent depending on how u wire it up.

[liam_b]

how i duno how too and it goes on for a sec then goes off duno wtf is wrong with it :@

mines doing the same looks like the bottom bit in the lighter has been pushed in too far anyone no haw i could pull it back out could be the same problem for jlf sorry for the :hijack: