blowing cold

[mickh]

the pipes going into heater and out are both hot but the heater is blowing cold..any ideas??

[bromi]

turn the heat control on to hot mate

[VTS_16v_Boy]

Check for a air block in the coolin system as this is a good sign that a air block is traped and stoppin warm water gettin to the heater matrix or it could be a problem with the heater section its self.

Try check for the air block first as even a little one could be causing the problem even if its not big enough to cause a runnin temp problem.

[beardy]

as 16V boy said you are either out of water or got air in the system.

[dui_yoursax]

or need it regasing, but dont take my word for it as i dont know sh**

[mickh]

turn the heat control on to hot mate

what was that ,a random post???..Thanks to everyone else,i,ll see if i can bleed the system the weekend.

[MikeCracknell]

Mine has just stopped working too....since the alarm was installed.

Remove the console, and on the temperature slidy thing there are TWO rods - I found that there was only ONE connected to the slidy thing on mine, so the engineer is coming (or I will do it my self :P) to repair it....

Thats a first idea!

***IGNORE ABOVE*** Clifford engineer punched a hole in the coolant line in the car which is why there is not hot air coming out....could you have an air bubble in the system?

[s8x0-vtr]

could be the heater matrix is nakerd guys