PDA

View Full Version : Problem...


mason001
20th December 2006, 09:39
right, when i had my install done.. i wired a neon into my interior boot light and disconnected the actual light.. a few days later the neon blew.. any ideas why? (i'm not good with this type of stuff)

hesslevtr
20th December 2006, 10:00
maybe faulty neon or wires caught and shorted out

mason001
20th December 2006, 10:03
maybe faulty neon or wires caught and shorted out

so what would you suggest..? take it back and swap it or have a general play around and see what i can do?

cheers

hesslevtr
20th December 2006, 10:08
well if its blown you wont get it working

upto if you take it back

how have you conected the wires to the boot light wires

mason001
20th December 2006, 10:16
well if its blown you wont get it working

upto if you take it back

how have you conected the wires to the boot light wires

errr.... my mate stripped the + n - wires off the interior light, and simply just wrapped the neon wires onto it, into a block so the neon acts as if its the interior light.

hesslevtr
20th December 2006, 10:20
so is there a possibility the wires may have touched each other then or even come lose

mason001
20th December 2006, 10:22
so is there a possibility the wires may have touched each other then or even come lose

ok.. kool.. cheers loads for that, i'll just have a play around. just wanted to check if the neon had fucked up proper.

cheers

Flimbo
20th December 2006, 12:25
have you checked fuses?

try the neon in your mates car?

Saxo-Slag
20th December 2006, 13:43
Try the neon on a 12v live see if it is the neon or your mates bodge wiring