View Full Version : Hey All!
Fletchie_1
27th December 2006, 15:38
Yet another newbie...
I'm having huge problems with my saxo at the minute... the previous owner disconnected the central locking from the front doors and left the back two and the boot on it, all because the alarm kept going off! Why not disconnect it from the siren huh? No fuses are gone and I am running out of patience!
Any ideas...?
Cheers...
J :p
Barry123
27th December 2006, 15:49
are the actuators still in place mate?
Should be just a case or reconnecting them... unless i'm reading this wrong :)
ad
davew
27th December 2006, 16:36
hey welcome to the site.....and dito above ^
srcnix
27th December 2006, 17:06
Welcome to Sax-P.
Fletchie_1
27th December 2006, 17:25
are the actuators still in place mate?
Okay.. I'm not 100% great with cars, I know the basics but what the fook are they! haha
Barry123
27th December 2006, 17:28
sorry matey.
Basically its the electromechanical thingy that pushes and pulls the door lock.
Josh_T
27th December 2006, 17:54
Welcome to the site mate :y:
riggsy
27th December 2006, 18:05
Welcome :)
Fletchie_1
27th December 2006, 18:10
That means taking the door off doesn't it... may have a bash at that at the weekend... the guy who previously owned the car said he disconnected the two front door 'cos the alarm was going off, do you think that if they just need reconnecting at the thingy-bobs which operate the central locking the alarm will go off? and if it does will I just need to get the sensitivty changed??
Full of questions! :A:
BTW thanks all for the welcomes!
Mikey
27th December 2006, 18:27
welcome have fun
Mark51
27th December 2006, 19:10
hello and welcome
xclairex
27th December 2006, 20:18
hey and welcome
xxxvickxxx
27th December 2006, 22:13
hey welcome :)
Barry123
27th December 2006, 22:29
That means taking the door off doesn't it... may have a bash at that at the weekend... the guy who previously owned the car said he disconnected the two front door 'cos the alarm was going off, do you think that if they just need reconnecting at the thingy-bobs which operate the central locking the alarm will go off? and if it does will I just need to get the sensitivty changed??
Full of questions! :A:
BTW thanks all for the welcomes!
I dont think you'll need to remove the door, simply the door cards (the plasticy things)
jaybiss
28th December 2006, 19:19
welcome mate
post the problem in the problems section and youll get a better response :)
Danr
28th December 2006, 19:21
welcome to sax-p :)
Charlie_sax
29th December 2006, 01:02
Hiya :)
Hannah
29th December 2006, 01:04
Welcome aboard! :)
Fletchie_1
6th March 2007, 13:11
I dont think you'll need to remove the door, simply the door cards (the plasticy things)
Okay... well I've tried to pull the buttons off... tried to pull the door panels off...and still no luck... It's p!55!ng me off now having to get wet opening the door lol....
I think I need to find something step-by-step.... any ideas?
I have also looked at the Hays Manual that I bought which was a waste of time!!! Nothing in there!
amy_1
6th March 2007, 13:18
Hi and welcome to the site.
djrem
6th March 2007, 13:32
welcome to the site
MaRiO89
6th March 2007, 13:36
Welcome
GTI_Lee
6th March 2007, 21:27
Welcome to the site buddy!
OnYaBoOt
7th March 2007, 10:45
hi welcome
hope you get it sorted mate
vBulletin® v3.8.2, Copyright ©2000-2025, Jelsoft Enterprises Ltd.