Dont understand if these are 30mm or 50mm? Help....

[riggsy]

Check this link.....

http://www.motorsportworld.co.uk/framefix.asp?ProductCode=E-20-22-002-01-20&PID=350215

Im after the eibach 45-50mm kit right, but on this link this bit confuses me.....

Chassis SO, S1.
Lowering Front/Rear = 45-50mm/30mm
Axle Load: Front = 785kg

Why do they say 30mm rear? Forgot to take that bit out as the saxo has the torsion bar?

What you think?

[SAM33R]

thats confusing as saxo rear is adjusted via torsion bar

[Ben_C]

You'll have to ring them up, only way to be sure as to what's meant by it.

[R4T]

they are telling you the axle load fi the front/back is lowered 30mm plus

[hesslevtr]

like i said on msn there the right ones

[riggsy]

they are telling you the axle load fi the front/back is lowered 30mm plus

What you mean by that dude?

Think ill have to phone to be sure, im 90% certain there the 45-50mm set...

[hesslevtr]

im 100% there right

[R4T]

yeh they are right for your car dude,but as im saying the load of the car changes when it gets lower,unladen weight n all that crap,but yeh in a nutshell they are correct!

[riggsy]

yeh they are right for your car dude,but as im saying the load of the car changes when it gets lower,unladen weight n all that crap,but yeh in a nutshell they are correct!

So when they say /30mm thats the load the rear will be under when the 45-50mm springs are fitted?

[Baz]

the sportline spirts on larkspeed are 50mm so im guessing they will be 50mm

[riggsy]

Get the link up baz :)

[R4T]

So when they say /30mm thats the load the rear will be under when the 45-50mm springs are fitted?

yeh,im not sure why they have posted that,as the car could be stripped or heavier with an install,never seen that before!!

[riggsy]

Baz just found them even cheaper for me and on this site they actualy say 45-50mm nothing else.....

Damn it does say about the rear dropping to 30mm....

http://www.europerformance.co.uk/pages/products/product_info.mhtml?id=28287