Help with Interior Stripping

[VTS_16v_Boy]

Ok, Ive already stripped out my Rear Seats and Parcel Shelf and wanted to go further, I wanted to remove the Rear Panels that hold the Parcel Shelf (the part that holds the small interior light that would light the boot area when the hatch is open) and then remove the Rear Seatbelts but couldnt get my Start Bolt driver into the hole.

If anyone that Has removed the rear panels could you send me a pic of the tool or offer to remove the panels (only Joking) :p

Just abit stumped I couldnt get the bits out :n:

[Richardson_VTS]

Use one of these mate. Can't remember what size it is though!?!?!

http://cgi.ebay.co.uk/NEW-SCREWDRIVER-TORX-T8-X-75mm-918532_W0QQitemZ330080194876QQihZ014QQcategoryZ680 34QQrdZ1QQcmdZViewItem

[b0t13]

goto tesco, they sell a cheap £10 toolkit with torx screws and loads of other stuff, thatll have all the tools u need to play with a saxo :O

and and when u put it all back, hope u like rattles :)

[VTS_16v_Boy]

Nar see thats the problem Ive got the rite sized bits to remove the screws but the srew driver and adapter got stuck in the hole and took me ages just to get the driver out the hole :-)

So I need a small driver set that will fit in the hole

[Mark51]

you can just get an actual torx screwdriver that cna tkae these out, there only a couple of quid and most tool/car places will sell them