Piper x problem

[CHR15_5]

Areet people, right here's the problem, ive got a pipercross induction kit for my furio, but when it is on the oil leaks because there's a gap between the oil breather pipe and the air filter connection. Well ive just bought an oil breather vent filter to solve the oil leaking problem, but now i dunno if i shud tape up the previous connection or what??

cheers

[R4T]

did you fit the rubber gromit you get with it?it goes just inside the opening of the filter?

[saunders]

Areet people, right here's the problem, ive got a pipercross induction kit for my furio, but when it is on the oil leaks because there's a gap between the oil breather pipe and the air filter connection. Well ive just bought an oil breather vent filter to solve the oil leaking problem, but now i dunno if i shud tape up the previous connection or what??

cheers

I have one of these on my furio, it reaches you just have to pull it on, and it will kindda click in place. It is a tight fit tho so I know where your comming from. You just need to block that pipe now, I dono what to use tho? a tight rubber gromit maybe?

[CHR15_5]

I have tried but there's just always a little bit of oil, hence buyin this oil breather filter... it's not likely to damage the engine or anythin if i jst tape over the hole?

[saunders]

I have tried but there's just always a little bit of oil, hence buyin this oil breather filter... it's not likely to damage the engine or anythin if i jst tape over the hole?

No it will be fine, just need to make sure you use something that can take the engine heat.
how much oil is comin out? Did you notice it on the floor?

[CHR15_5]

It's normally just a bit of a drip but at the end of the day it's still leaking... i'll just use some insulating tape or something like that which is strong etc

[saunders]

It's normally just a bit of a drip but at the end of the day it's still leaking... i'll just use some insulating tape or something like that which is strong etc

yea should be fine, just wondering how much oil is coming out as I havn't noticed it on mine. When you had it connected did the breather pipe click on properly?

[CHR15_5]

No not really, as i say there's a gap where oil can escape

[saunders]

No not really, as i say there's a gap where oil can escape

yea just cover it with eletrical tape then.

[SAM33R]

what sort of power did you guys get or would you expect from a piperX on a furio?

thanks

[saunders]

what sort of power did you guys get or would you expect from a piperX on a furio?

thanks

1bph at the most probably, as its an open filter

[SAM33R]

oh ok

i thought it was the enclosed one as thats what i wanna get for my 1.4 and piperX enclosed are meant to be the bizz

[saunders]

oh ok

i thought it was the enclosed one as thats what i wanna get for my 1.4 and piperX enclosed are meant to be the bizz

yea the enclosed one's are fine mate, prob look at a couple more ponies at a push. Need to upgrade the manifold and exhaulst system to really benifit tho

[SAM33R]

hmmm..... 1.4 are about 75 bhp at the fly, say i added a piperX, 4-2-1 and cat back exhuast

atleast 10bhp???

thanks lads

[CHR15_5]

i would not have thought so mind mate, 10 bhp seems to be pushing it a bit in my opinion