PDA

View Full Version : ICE Wiring


ThaPimpDaddy
19th June 2004, 22:00
Hi Guys,

Just bought myself a 1999 VTR and I wana move all my ICE over from my old Clio to the Saxo, but where can I run the wiring through to the boot? In the clio I cud unclip the plastic on the side and shuv it under there - cant see how its possible in the Saxo...

I'm sure its an easy one so any help would be appreciated!

Cheers peeps! smileys/smiley16.gif

GreenSaxo
20th June 2004, 13:07
you will have to lift up the carpet.. and run it under that....

Storm_Force
20th June 2004, 16:50
Yer that whats I did.

ThaPimpDaddy
20th June 2004, 17:58
Its fitted pretty tightly smileys/smiley5.gif I spose I'll havta jus giv it a go....

Also, where abouts do I get the battery wire throught the bulkhead?!?!?!?

barrett
20th June 2004, 20:14
by the brake flid resivour there is a gromit i believe.... i did mine slightly differently but tho!

Storm_Force
21st June 2004, 00:12
couldn't find a hole to put the cable through so drilled one and used a rubber gromet.

Andyt
23rd June 2004, 00:14
there is a spare grommet where the passenger door opens, the wire can be fed down behind the front wing and through this, then up under the carpet and the back seats.

Hope this helps

reevesy_vtr
24th June 2004, 01:47
look under the glove box up to the middle of the car there is a BIG gromit there i even go 0 gage in. A bit of a bump in the carpet but shit loads of power in the boot.

oz_borne
25th June 2004, 22:04
souonds like you have already done it, but i found that grommet, you gotta be a fucking contortionist, but you get it in there. I had a long bit of metal to shove under the carpet and it worked. Took ages but like they said lots of power.

you have to be careful with that grommet in the side doors, cos water will get in through there unless you make sure all the wires go at the bottom of the grommet.

happy fixing

smileys/smiley14.gif

Andyt
25th June 2004, 23:12
Don't worry Oz, my grommet is tight.....like the anus. smileys/smiley4.gif