Mk2 Saxo VTR Fog Lights

[brazillianwill]

Hi there,

Just bought my saxo vtr mk2 the other day and wow! I think that pretty much sums it up! The only problem is ive got a drivers side fog light out and was after some help as im not sure how to get behind the bumper to change the bulb. do i need to pop the fog light out?

if there are any pictures or somebody has already posted this before any links or anything would be really helpfull.

cheers


will

[furioAL]

If you just changing the bulb you don't need to remove the whole fog light...

get underneath your car, you should be able to feel the plastic wiring plug that goes into the back of the unit (think it's green)... it simply twists half a turn and then pops out... then you can swap the bulb over, and refit it to the unit...

Alex
:geek:

[brazillianwill]

thanks mate, ill give it a go now!


will

[furioAL]

Can sometimes be quite hard to twist...and unfortunately cant remember which way you twist them...

Alex
:geek:

[Predator_R32]

best to get it jacked up on some axle stands or park one side of the car on the kerb so you can get under and look at it :y:

[furioAL]

My car is like a 4x4 and i can get underneath it regardless lol :p no need for axle stands...

[brazillianwill]

thanks for the help, got it sorted no probs with everyones help. if anyone else has the same problem i would suggest putting it on stands or up a kirb as previously suggested because it can be tricky doing it blind!

thanks again.