Right I am keeping the VTS, Whats next?

[artnmotion]

I need the following as i sold all well most things.

A exhaust system that will give me power (Piper i have been told)

An induction kit Pro Comp?? (I used to have a BMC one)

Also should i get some alloys (black no sliver) or should i spray the VTS ones??

Strip out rear seats??

Buckets??


What should i get Advice please.

Thanks

Dom

[Scott]

system and an enclosed induction kit, then a manifold.

I like the vts alloys you have so maybe get them sprayed/powder coated?

Strip the rear if you dont carry passengers and want to lighten the car a bit, also get buckets if you want them but no real need for them

[artnmotion]

Scott your alive again during the Day lol

I only seen your replys at 1am or 2am in the morning

But what Maniflod should i buy ??

Is the Standard one a 4-2-1 or 4-1?

[Scott]

not sure on the vts manifold i think its 4-1 though i have heard it being a 4-2-1 as standard smileys/smiley5.gif so not entirely sure

i would get a GMC manifold or possibly the supersprint stainless manifold but the bottom bracket on these is very weak and probably will snap which can then end up cunking around so if it did get it i would do some extra welding on the bracketsmileys/smiley17.gif

Im normally on during the day just depends what im up tosmileys/smiley17.gif

[citrovts]

also new tints smileys/smiley2.gif

[Areke]

btb exhaust system!!!

[houstie]

I believe the manifold is a 4 into 1 scotty.

I'm going down to RMS in prestwick mate, going to get them to fabricate me a new manifold. There work is second to none.

Have you heard of them?

[Scott]

yep heard a little about RMS and it has been said to be good, how much is that going to cost you? just wondering to compare pricessmileys/smiley17.gif

[artnmotion]

thanks for your advice people any more?

[Scott]

start with those listed and lay it as your base, after that you need to look at what you want, do you want more power? if so how much and how much have you got to spend? then after looking at these you can decide if you wants cams and remap, throttle bodies, super/turbocharger etc...

[houstie]

Well i got my girlfried a system from the cat back, which had 3 exit pipes, and i got a couple of induction pipes done. The system for her car is really good, 100% and was £280, my pipes were £100.

For the manifold he was quoting £140, 4 into 2 into 1, stainless steel, and he'll do it in a day.

Pretty good i think.

[Scott]

smileys/smiley3.gif

that sounds very good be sure to post pics when its done!

[houstie]

Will do mate. Going down next weekend to get an exhaust done on my mates car then hopefully get my work done at the end of august.

Looking for more power, but strapped for cash.

[Scott]

sounds like a good deal smileys/smiley4.gif

[jamesg88]

i have just had fitted a full exhaust system with 4 3" exits and a green induction kit smileys/smiley4.gif

[artnmotion]

Going to go for POWER baby

[jamesg88]

good for you mate keep us updated on your progress smileys/smiley4.gif

[artnmotion]

/members/artnmotion/Tints_gone.JPG

/members/artnmotion/Tints_gone2.JPG

[jamesg88]

smileys/smiley20.gif

[starkie]

jamesg88

u sed u just fitted a new exhaust system.. u got any pics and who makes it how much it cost ect.. cheers m8 smileys/smiley17.gif

[jamesg88]

yea i did it is a scorpion made one and cost £300 i will post some pictures up in 1 mo i am just trying to resize them now smileys/smiley4.gif

[jamesg88]

C:\documents and Settings\James\My documents\My Pictures\sss.JPG

better work

[jamesg88]

there matey smileys/smiley17.gif

[artnmotion]

I have found the Piper exhaust i want and a place to buy it is it too expensive at just under £200 for the full system for a slash cut exhaust?

[Scott]

under 200 quid for a stainless system is cheap!!!!!

[GreenSaxo]

the piper ones are top quality smileys/smiley4.gif smileys/smiley4.gif smileys/smiley4.gif also the sound from them is great smileys/smiley17.gif

get one smileys/smiley17.gif

[artnmotion]

I am waiting for Demon Tweeks to get back to me about it as i enquired about a twin exit either side but i donn't wanna lose the space wheel