Brake vibe I can't fix.

[johnnyg_vts]

Changed both front suspension lower arms, changed both front arb drop links, wire brushed the mounting faces on the hubs, then put on new pads and discs but still vibrating when braking from speed. its a really bad shake and the bits i have changed have made no difference.
i have 2 new track rod ends that i will fit asap.
what else can it be?
driveshafts?
steering rack?
thanks in advance.

[saxoash]

Have you checked the discs? they sound as if one of them has warped

[johnnyg_vts]

i realise this, my question is what is causing it.
the discs are brand new and yet warped within a couple of days - and no i dont drive like lewis hamilton!

[l1ukeRS]

the lower engine mount mate change that and i reckon it will fix it i had the same problem once
get a powerflex 1 i would
or a standard1 but id say thats what it is wont hurt to do anyway and its easy to change pm me if you need any advice

[RedB]

wheel bearing? had mine changed yesterday and is much smoother

Warped dics?

[johnnyg_vts]

already got a powerflex gearbox/ lower engine mount mate.
could be a bearing, there is a slight rumble.
im going to have a right good tug this morning!:y:

[johnnyg_vts]

ok...no play in either hub...whats next?????

[AlexR]

sticking caliper causing brakes to warp on one/both sides as soon as you drive at high speeds.

[Agent_Orange]

Did you say the hubs ok?
Got a vibration through steering wheel. Under braking through brake pedal at speed (50+) and grinding noise from nsf wheel, on/off with rotation of wheel at low speeds.
Had wheel bearing replaced and disks aren't warped. Pads replaced and still stupid noises. Now been told it's my hub gone - what's that mean?

[stebbs1471]

i phoned citroen about something similar and they say its the abs rings on the hub, they crack and cause the caliper to go into abs mode. even though no lights come up on the dash... try it buddy...