correct way to route wires to amp

[time_to_ride]

Amp has come 2day Preped the power cable and preped the earth :p

Just wanted to know which wirers shouldn't you run down the same side? (supposedly)

Thanx
;)

[dj_sim]

Hi best to keep the RCA the opposite side to the power ( put the power down the passenger side.

Easier .

[time_to_ride]

i knew there was a certain wire that needed excluding. Thanx.
Which side should i run the remote down :p

[furioAL]

Id recommend sticking the power down the passenger side... then sticking the RCA's and the remote down the driver's side.. you could route the remote down the middle but it's more hassle.. and there isn't enough current through the remote for it to cause any interferance to the RCA's...

Alex
:)

[time_to_ride]

Thabnx allot! both wil be repped :p

Al: could you have a look at your false floor thread plz m8 and reply to 1 of my questions :)

Thanx

[furioAL]

Thabnx allot! both wil be repped :p

Al: could you have a look at your false floor thread plz m8 and reply to 1 of my questions :)

Thanx

Yes buddy, replied :y:

[Baz]

if you have decent wires it doesn't matter if you put them on down same side, but for piece of mind and the catious approach, put them down different sides as mentioned above

[time_to_ride]

I think they are wank wires TBH. i though i was gettin AutoLeads woth the deal but iv bin sent PYLE :S dunno if they are good or not

[steviet]

i have them all down the same side on every car i had , and never had any problems.

[Predator_R32]

think you only get interference with cheap wiring, where as better quality wiring wont do it, well thats what people say, i still keep them seperate anyway

[time_to_ride]

Well...It's thursday, I have the day off work and everything i need for an install...time to build 1 :p

Raggin the seats out 2day :) should be fun the wires i put in last nitestop the carpet from goin back under the seals so need to feed the wire through under the seats :)

Ill just have to nip to work and use some crimpers and wire splitters thats all :(

Well im off to do that...then its out shoppin for MDF :p

toodle
;)

[time_to_ride]

All done will post pics in new thread :)

[shane2007]

i run all wires down passenger side.hadno trouble