View Full Version : Removing mk2 spoiler - pg2
Andy
28th August 2007, 09:44
Tried to remove it this morning and where you unscrew it from in the window, well they just wouldnt turn at all. Any ideas how to get them off?
headcharge911
28th August 2007, 11:06
i think they are glued in aswell.
RICKYP-RPM
28th August 2007, 12:02
yeah they have locktight on the bolts
Andy
28th August 2007, 12:09
so how would i get to remove it?
Baz
28th August 2007, 12:16
mine just unscrewed Andy.....just took a day and age!
Andy
28th August 2007, 12:18
did you not heat it up or anything like that?
steviet
28th August 2007, 15:07
ive taken 2 mark 2 spoilers off and every time they were difficult. plus on both spoilers 1 screw snapped.
Baz
28th August 2007, 15:11
nope didn't heat it up or anything. took it off outside Halfords after buying some grommits
RICKYP-RPM
28th August 2007, 15:49
i was rough and used an air gun, and just prayed the vibrations did not shatter the window.
Andy
4th September 2007, 12:01
can anyone else help me with this please as im needing to get it off
Karl
4th September 2007, 12:05
did you get my mk1 spoiler bud?
Mark51
4th September 2007, 12:05
i just used some small mole grips and used that.
andy-you mates coming to mine tonight to give me a quote and hes coming again on saturday to do the work
Andy
4th September 2007, 14:32
souless - im off to get it tonight, cheers
mark - hope you get a good quote, ill text him to give a good quote lol. then you can help me remove my spoiler
Clouds_mate
4th September 2007, 14:45
Need to remove mine too but one of my bolts is shagged :sad:
Andy
4th September 2007, 15:38
were both fooked then lol
Andy
9th September 2007, 14:16
right had another go at removing today and after a bit of heat applied to the bolt they started turning but the the worst happened the grooves that the torks but goes into has turned and there is nothing to grip now. So how the hell to i take it off now. Any ideas?
steviet
9th September 2007, 16:36
molegrips would be best i think. if thats how you spell it
Andy
9th September 2007, 16:39
im a bit thick but what do they loo like
steviet
9th September 2007, 16:40
there like big plyers but they lock shut when you close them.
Andy
9th September 2007, 16:43
ah right will have to go get some tomorrow. cheers will try that
Andy
23rd September 2007, 17:09
right tried using mole grips they were no good. both sides of the spoiler has come away a little bit, so i was thinking of tried to cut the both bolts to bring it off the window but apart from that im stuck with ideas. Anyone else got any ideas?
Andy
25th September 2007, 21:56
anyone at all know what i could possibly do without gettin a new window
Craig
25th September 2007, 21:58
one other option, drill the bolts out and u wil just need some new bolts, have to get right size drill bit and be very careful with drill, i drill bolts out all the time, then u just re tap the whole in the spoiler
Andy
25th September 2007, 22:11
fancy giving me hand then?
steviet
25th September 2007, 22:29
if you have to drill the bolts mate. i have to spare ones. there brand new. they only sell them in a pack off 4. so i have 2 spare. i think they bolts once there in they are mean`t to stay in. why do you want to spoiler off anyway? also thinking about it there mate. i tried drilling them out before also and i ended up pushing the part on the spoiler where the screws go in. into the spoiler.
Andy
27th September 2007, 08:58
i have a vts spoiler that is going on
Morgan_VTR
25th November 2007, 17:21
you sort this out mate?
I went to do mine today but I fooked the thread like some of you have done
Baz can you get grommits to go in the window where you removed the spolier ???
Where you get them from... and what size are they?
cheers
Baz
25th November 2007, 17:34
not sure on size i got them from the assorted pack at halfords
Morgan_VTR
25th November 2007, 18:07
oh right, did you use 4 then? 2 on each side of the hole?
Luke
25th November 2007, 22:59
Andy sold the car mate, so he never got the chance.
Morgan_VTR
1st December 2007, 17:50
Andy sold the car mate, so he never got the chance.
Devastation! Thanks for the info mate!
Well in any case can anyone recommend someway to remove the spoiler? One thread is knackered (my own fault) and the other is ok. I tried molegrips but I didnt seems to have any grip?
Do you reckon halfords could have an answer?
Dasher_VTR
1st December 2007, 18:13
yeah the they have lock tight on and i got mine off with mole grips and a lotta elbow grease
Morgan_VTR
1st December 2007, 18:23
cant seems to get a grip on the bolt heads.
hmmmmmmmmmmmmmmmmmmm.
steviet
1st December 2007, 18:54
i had bother taking them out on 2 saxo`s. best tool for it was the mole grips. but the bolts have a habit off snapping. so i had to buy new bolts from citroen. only come in a pack 4. so if you don`t get them off in 1 piece ave got 2 brand new ones ill sell you if you need them.
vBulletin® v3.8.2, Copyright ©2000-2025, Jelsoft Enterprises Ltd.