sat 12th May, did a little work for MOT
Posted 13th May 2012 at 00:00 by NismoSteve
Pulled the horrid coilovers off today, and fitted the original struts. That's after I had stripped them and welded the pring pans on and new top mounts and bearings.
For now I've (carefully) welded the balljoint into the polybushed wishbone and fitted that.
And while it was all off I've replaced the leaking diff seal, so that's the gearbox leak sorted now too.
I'm now planning to pick up another set of struts to grit blast and fit B8s and faulkners to.
That's all I had time to do after work today and before I had to take our lass shopping.
For now I've (carefully) welded the balljoint into the polybushed wishbone and fitted that.
And while it was all off I've replaced the leaking diff seal, so that's the gearbox leak sorted now too.
I'm now planning to pick up another set of struts to grit blast and fit B8s and faulkners to.
That's all I had time to do after work today and before I had to take our lass shopping.
Total Comments 0
