Mobile Devices: Lite Theme Citroën: Citroën Trader | Saxo Trader | C2 Trader Peugeot: Peugeot Trader | 106 Trader Enthusiast: Saxperience


Go Back   Saxperience - Citroen Saxo Forum > Blogs > Simo' Says...

I intend to use my blog to keep you informed of things happening with my car(s) and anything in life I find interesting, unusual or worthy of sharing! Please check back regularly to see what's been happening in the world of Simo
Rate this Entry

Stripping the interior out & gearbox replacement #3!

Submit "Stripping the interior out & gearbox replacement #3!" to Google Submit "Stripping the interior out & gearbox replacement #3!" to Facebook Submit "Stripping the interior out & gearbox replacement #3!" to StumbleUpon Submit "Stripping the interior out & gearbox replacement #3!" to Digg Submit "Stripping the interior out & gearbox replacement #3!" to Twitter
Posted 31st January 2010 at 22:11 by Simo

April 2006... Gearing up for Bruntingthorpe!

The French Car Show was getting better and better as each year passed and this year a trackday had been arranged for the day prior to the show event. Saxperience booked half of the day's session at Bruntingthorpe Proving Ground. All I had to do now was get the car ready for some track action!

The ICE was ripped out of the rear of the car and stored in the shed; it wasn't likely that it would ever make it back into the car, but it would make a good install for someone else one day!

With the boot stripped back to the shell the car had lost some weight, but it wasn't looking too hot! Citroen had tried to save a few pence when building the Saxo and hadn't bothered to paint the boot floor properly. How annoying!

Always one to try to do a job properly I decided to respray the boot floor and rear interior the same shade of blue as the outside. Before having the custom paint mixed, I filled some dents in the floor and rubbed everywhere smooth. It turned out to be quite a big job, but I think the finished look made the hard work worthwhile!

Just three days before the FCS track day, disaster struck! When accelerating hard in first or second gear, a loud grinding noise and judder could be heard/felt... it was identical to the problems I had in September 2004 when the crown wheel came away from the diff'! I couldn't risk taking the car on the track like this, so I had to find a replacement gearbox... and quick!

I took a day off work and went touring around scrap yards looking for a VTS gearbox. Nobody had one and the scrap yards that did, turned out to be 1.1L or 1.4L gearboxes; apparently the gearboxes are 'all the same'... yeah, ok fella!

With time rapidly dissapearing, I decided to buy a 1.1L gearbox. It was as cheap as chips (£40) and was available off the shelf from a friendly Citroen breaker down in Stoke. I went to pick the gearbox up and myself and Danny Speight fitted it the night before the trackday! Thanks also to Phil and to Raf for letting us use your garage and gear... although you did charge handsomely for the privelage!

The box fitted a treat after swapping a few sensors and connectors over and the horrible judder/grinding noise had gone!

The official gearbox replacement count now stands at three!

Views 8843 Comments 0
Total Comments 0

Comments

 
Total Trackbacks 0

Trackbacks


All times are GMT. The time now is 02:56.