Saxperience - Citroen Saxo Forum

Saxperience - Citroen Saxo Forum (http://www.saxperience.com/forum/index.php)
-   Your Saxo Photos / Videos / Progress Reports (http://www.saxperience.com/forum/forumdisplay.php?f=19)
-   -   Dans vts project Stud drilled out cant drive for 2 months pic of my hand (http://www.saxperience.com/forum/showthread.php?t=333735)

DansexysaxoVTS 14th September 2010 14:09

sound deading and amp rack
 
Got sum vibe deading for the boot foor and under the rear seats and made a amp rack and power cap rack and carpet them as well











Got 2 mini cooling fans coming for the amp to keep it cool

DansexysaxoVTS 15th September 2010 22:25

Had a little trip to halfords today and got sum bits for sparying and under sealing the back of the car





Went and got a couple more things


Little trip down to the scrap yard as mine is broken on the corners


Got the ecu tray and battery tray in to the rust remover and i also made it a bit stronger mix so it should get the rust of lol


Also got painting the rear and side pillars








Ran out of plastic primer so will do the front ones at a later date

DansexysaxoVTS 16th September 2010 22:03

Right took the ecu try and battery try out of the rust remover after 24 hours





Gave them a slight rub down to get the rest of then primed them



Then a few coats of gloss black



Also fitted a sparco fuel cap


DansexysaxoVTS 16th September 2010 22:07

Updates coming
 
Angel eyes

Fitting my de-bage grill of my old vtr it has a slight crack in it so if any one has one for sale post me

Trip to im axles

sn3ddon 16th September 2010 23:05

Look really good mate

DansexysaxoVTS 16th September 2010 23:07

Quote:

Originally Posted by sn3ddon (Post 4721130)
Look really good mate

Cheers mate

sn3ddon 16th September 2010 23:09

What's your plans engine wise

DansexysaxoVTS 16th September 2010 23:16

Quote:

Originally Posted by sn3ddon (Post 4721144)
What's your plans engine wise

Dont know yet mate um good clean up and re spary chrome rocker covers may be sum cams and remap and manfold at a later date

harveyg 23rd September 2010 01:57

car looks gorgeous mate.. not sure about the size of that exhaust though

DansexysaxoVTS 25th September 2010 17:22

Quote:

Originally Posted by harveyg (Post 4736546)
car looks gorgeous mate.. not sure about the size of that exhaust though

Its only a 4 inch rolled tip exhaust mate

DansexysaxoVTS 25th September 2010 17:28

Ready for mot
 
Had to get the car ready for mot on monday had to do the following

2 new drive shafts as the inner gaters have gone

1 new rear ABS sensor

n/s top mount and bearing

jack123 25th September 2010 17:32

looking good so far buddy!

DansexysaxoVTS 25th September 2010 17:35

Quote:

Originally Posted by jack123 (Post 4742854)
looking good so far buddy!

Cheers buddy

DansexysaxoVTS 25th September 2010 17:48

Took the spare wheel cage of and painted it in red oxide



Got a red forge heater noab



Plans over the next couple of weak

Paint the spare wheel cage black

under seal the back of car

Trip to im Axles

Angel eyes

DansexysaxoVTS 29th September 2010 21:49

All passed MOT :y:

I now have knocking coming from the front end so i have replaced

Both bottom arms

Both drop links

o/s top mount and bearing

Took it out for a test drive and it still knocks but not as bad :wall:

So done some reserch and took all the front end of agine and took the spax psx dampers out of the legs and thay are F**ked just after 600 miles :wall::wall:


got a KONI street kit coming and getting money back for my spax

Will get pics up soon

DansexysaxoVTS 1st November 2010 22:31

Big update
 
first of all been quite busy not had much time to spend on the car but done a few things the spax kit has came of and koni kit on







Took the spax kit back and got my money back so it now lowered 35mm not 40mm

Next was a refurb Oilite Bush Axle from im axle so i took a trip 2 hour trip there the other saterday morning

old rear axle cam of




New one got built




Got these before i went











Next up i cleaned the boot floor up ready for under sealing




sn3ddon 1st November 2010 22:41

Looking good mate get it undersealed for winter mate

DansexysaxoVTS 1st November 2010 22:47

Thats on the job list for 2 mo if the weathers ok

sn3ddon 1st November 2010 22:51

The whether is shite lol I can't do anything cause of the Scottish weather lol

DansexysaxoVTS 1st November 2010 22:58

Its been sunny hear in suffolk today so hope it is 2 mo lol


All times are GMT. The time now is 10:30.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.