hi, can anyone help me. i cant find any wire with 425 on it coming form the ecu but i have found a green wire coming from pin 6 saying 426. is this the wire i need to tap into?
thanks

amazin thred just a 1 thing lol i didnt have to take the sterin wheel off ...
:)

great guide worked for me but does anyone no how to wire up the temperature gauge??????

Hi there,
I have a 1998 saxo x 1.1i, myn does not have a rev counter and i was wondering if i purchased a dial from http://www.visual-performance.co.uk/ would it work??? And would you think a local garage wud fit it for me or wud i have to do it my self ha

Thanks in advanced

sorry too bump this topic but is there anyone from bristol that could help me do this as im a little unsure ?

i must be a fool! it hasnt worked for me and i check again and again and again

ahhh, mabey not it, it works now :) very good guide! thanks buddy

Awesome, I've got clocks from another 1.1 that looks same except with revometer and not the clock. Do I need the wiring loom for new one or will the above steps work exactly without buying anything additonal on top of the new clocks?

i know this may be lazy.
i am located in southampton would anyone who knows how to do this be willing to earn some money in helping me do this.
Pm me?
Thanks Ross.

i have fitted a new dial kit to my saxo,
unfortuantly the temp guage and the rev counter do not work,
if anyone has done this before and lives in southampton area, would you be up for helping me out and earning some dollar possibly?

i know this may seem cheecky but this is an area i have not yet covered and dont really want to mess things up
Thanks.

Does anyone know what wires to splice on a vts engine loom to make my temperature gauge and oil pressure gauge work? I have an 1.1 interier loom. I cant find information anywhere and am struggling with haynes manual diagrams

awesome guide,wired my rev counter in today and all working perfectly
liiks so much better than the old big clock :)

dont work.
 

Please help me.
Sorry for my english.
I bought rev counter (orginal dials from saxo) and i fitted in my car.
I does everythng like this guide.
Speedometer and fuel gauge work but rev counter not.
Where is problem? Maybe dials is broken?
or pulse generator?

what year car do you have mate. what model etc???

I have saxo 1.1 mk1
I check wire from dials (pin1) with "electric meter??"
When engine is off electric meter show 11.80 V
when turn on engine show 8,80v
But when i press on accelerator nothing happen. still show ,8.80V

Where is problem?

Saxo is from 1997.

engine off but power is on.



engine on

Sorry for multiposting but i dont see "edit" option.

OK so i read about my problem on this forum and i found this:
I this true?
I have saxo from 1997r 1.1i with bosh ECU.

Can i change ECU from newest saxo? or can i take singal direcly from sensor?