love white saxos, black vts wheels will look lush

Really nice mate. Love the look of the fornt. I took off my rear badges and furio badges on mine makes it look loads better. Just use a hair dryer to heat em upo then just peel them off.

cheers will give it ago its gone for its MOT to day will let use all know how it gets on .

UPDATE :

passed it MOT evyhink was fine apart from nee break pads so wasnt to bad.


im stook dunno what to do to it first lol dont have a lot of money to buy things for it latey start my new job in march dont get paid till the end of march so look like im just ganna have to do small mods to it.

thanks

Take off the "Citroen" and "Saxo" badges on the back and spray them black, that's a cheap mod until you got money.

HELP :

This week im ganna tcut badges

Im thinking of painting my calipers red ? nt to sure any help, what do i do just take the alloys off mask up the disc's put newspaper down and just paint them no point taking them off takes to long doesnt it ?


also when iv done that im thinking of just painting back drum black ot hide the little rust what yous think ?

thanks

nice car matey! :y:

hey need peoples opinion rite

what do you think about this n will it be a deadeasy job to fit it ?
http://www.europerformance.co.uk/pag...roduct=3747926


also planning on getting these
http://www.demon-tweeks.co.uk/produc...IMR2S565384098

sont know if to gt them in black ?


btw painting calipers red on friday and also at the weekend im painting drums back to neeten them up.


thanks

Backbox's are easy to fit mate, only 2 bolts on the u-clamp. Get some exhaust putty too so that there's no leaks on the join.

For the calipers, when I painted mine I just left them on the car, didn't even bother to mask up the discs, just used a small paintbrush and took my time :y:

cheers mate i think i know what im doing just need to make sure that its a exact fitment for my car if you know what i mean lol coz dont what to do any cutting or welding.

caliper should llok gd when they are done so should i not even mask the discs up ?

once the calipers im ganna neeten up the back drums with abit of black paint.

thanks

Mask them up if you want but I didn't bother lol easy enough to do it with just a paintbrush :y:

If you're worried about getting paint on the discs though then mask it up for peace of mind lol

lol will do think havent got much of a stedy hand when it comes to things like that lol


my car needs lower but dunno how to go about it lol dunno what im buying or were to get it done at dont want to travel to far for it to get done i live in noth west area


thanks

hi

i manage to get ma calipers done to day look pritty cool when they were done eveythink went fine.

BEFORE:

[IMG]http://[URL=http://img262.imageshack.us/my.php?image=dsc00042s.jpg]


AFTER:

[URL=http://img262.imageshack.us/my.php?image=dsc00044g.jpg]

NEEED ABIT OF HELP :

i was having a little look in my engine bay to day and you know the rubber part inbetween the rocker cover and the gasket it has split in a few place is this serious? should i get a new one and when can i get one ? also are they hard to fit?


thanks

sorry i ment were can i get one lol

Nice car mate

what is the best way to neeten up the center caps?

Well it's looking better than when you first got it but I'd seriously lose those chavvy wheels before anything else....

i doing that just getting ma money together i want some of demontweeks BK ones carnt remember the actual name but they are silver with black inside the rims if you know what i mean lol wanted to get some vts ones but they are really hard to get hold of.

thanks

It looks nice as it is! I would really save up and save up until you can afford to lower it first mate, it would make the biggest difference to looks and handling of the car. Then buy a backbox, its got a nice shiny tailpipe on it as standard!

Get it lowered 60mm all round (maybe a little more a the back) then take off all the stickers and colour code it all round. Leave the lights, front angels maybe but the standards look the best on a white saxo IMO.

As for wheels, what size are the fox ones? What are the tyres like? I might offer a swap with you if you want?

cheers, yeh was think of just saving now and getting it lower its just inding a place that does it round here. plus dont want it to low as eveywere in this town there is a speed bump lol not joking its realli bad.

Aloys are 15" perfect apart from few scufs. tyer are all perfect i just bout the car a few months back but befor i got it i think the owner put brand new tyers on all 4 so yeh they are pritty gd. what alloys you got ?

thanks

Just lower your motor 40mm will be fine over speed bumps dude.......:y::p

yeh was thinking about that much u recon 40mm alround ? just decided that i want some black or gray colour vts rims would look class its out on the road 2day finaly got it insured and fully taxed but i recon vts alloys would look mint, what size are vts alloys ?


thanks

Mine is 40mm all round on vts rims!! handles realy well....:y::y: vts rims are 15" inch......:p

sweet thinks it ganna be 40mm alround ehh you know what im ganna get some vts alloys i wount need any spacers or out will i? just fit them straight on should be fine.

Will go straight on bud!!:y::p then you will need to drop in vts engine on later date.......:fcuk::y:

lol yeh and i have the time and money to do that lol wish i did. shouldnt have to tell ma insurece if i get vts alloys as im going back to standard.

juat carnt wait to pass my yest now lol ganna go to a meeting soon as i pass ma test lol

My vts wheels, came on me vts so were covered with me insurance bud...

cool i carnt wait to get them now lol i maybe buy some and get them sprayed black or gray

Ive painted fer few in glossy black for people...:y::y:

look nice ? how much do you charge ? fancey doing some if i end up getting some ?

Realy easy to paint bud!! you should have go:y: got fer bit of work on at the min,with mates cars...:fcuk::y::p

yeh think i might anyways im ganna go past bed time lol

Yer its late.........:fcuk::bump::bump:

As long as the tyres are in good nick, wheels dont need spacers i'll swap you for my dark grey VTS rims if you want? They've been painted recently so clean up a treat (see progress thread).

Say £80 my way?

ye just needs lowering now mate nice car

yeh tyers are perect n no i dont have spacers on mine so .. yeh that would b great perfect just what i want.

£80 sound ok lol think is how are we ment to swap because i dont have my full driving licence so i can nt go on motorway or far to meet you if you know what i mean.

thanks

which alloys dont know what to go for black or white?

[IMG][URL=http://img21.imageshack.us/my.php?image=foxfx2white425x425.jpg]

black or white?



well they arnt quite black but whitch ones top or bottom ?

just give it a wash to day just to let you know how it looks at the moment





<a href="http://img18.imageshack.us/my.php?image=dsc00049f.jpg" target="_blank"><img src="http://img18.imageshack.us/img18/5611/dsc00049f.th.jpg" border="0"/></a>

any sugestions?