![]() |
does any1 have the ecu pin outs from the ecu on a single plug vts setup
cheers |
pin diagram ecu 3 plug?
anyone have? |
help
hi all
the wiring diagram on the first page i have a 98 saxo scandal is it for this car thanks for any help as i had to get a new coded key done and cant get the K light to go out mary |
does any1 know if a 3 pin vts engine and loom is plug in and play into 3 pin vtr. vts 52 vtr 03 plate ?
|
mk2 vtr to mk1 vts
hi i no every ones heard this a million times but iv got mk2 vtr 52 plate got bored of the power desided to go and convert it to a vts for the time being when bort a good vts engine got it for a gd price and gd millage so started stripping everything out looked at the loom then it hit me as every one knows and i should of checked i bort a vts engine outa a p reg vts so that makes the plug on the loom not the ecu side the other end is smaller than the mk2 vtr iv looked for 3 plug ecu and loom but nothing flotting about im realy stuck its bin of the road for 2 weeks now and dying to get it running is ther any one that can help me out i carnt find a mk2 vts loom that has the single plug ecu beacuse if i can i think it should be alright coz aint the w reg vts got the big plug but got the single plug ecu can some one help thers gota be some one thats done this not every ones gone bort mk2 vts engine for mk2 saxo is any one can help pleas email me on tup15@hotmail.co.uk thanx as i dont come on here much cheers
|
Quote:
Good luck with the car. |
hi guys. i renew my speedo but my rpm is not working.
i have a saxo 1.1l,i put a vtr speedo,is there wiring change to do or to add? |
did anu one ever find out about a 3 plug ecu With the bosch labe underneath the pins are marked as
Block 1 HGFEDCBA 4 -- no pins 3 --8 pins 2 --8 pins 1 --8 pins Block 2 theses pins go to the conector that conects inner loom with engine loom ABCDEFGHIJKLM 1 -- no pins 2 --12 pins (2e-32)(2g-5)(2h-9)(2i-8) 3 --12 pins (3b-10)(3c-2)(3d-31)(3f-16)(3j-28)(3m-30)(3k-33) 4 --12 pins (4c-29)(4b-1)(4f-7) Block 3 ABCDEFGH 4 -- no pins 3 --8 pins 2 --8 pins 1 --8 pins its the ones in red that i need |
is this all 4 a mk 1 vtr ????? silver top ????
|
right so if i wanna convert my 3plug vtr to a single plug vts which diagram do i use???
asap replies would be much greatful cheers |
bit of a bump
ive been searching the internet but cant find what im after im wanting the interior loom diagram for the elctric windows as im wanting to relocate my switches but also change them into like toggle switches, so really need to work out which each wire does cheers tiny :y: |
Quote:
|
Quote:
theres about 8wires :err: |
I had lexus lights on the back and decided to put tinted standard 1s back on, i've matched the wires up but when i hit the indicator with the sidelight on they both flash can some1 please give me a tad advice to fix it
cheers |
bit of a bump but im looking for what pins are what on a 3plug vts anyone have this diagram please?
|
I have a 99 V reg 106 gti donor car and will be shortly buying a 2000 X saxo vtr. I'll be putting the 16v lump into the saxo and will be splicing the looms to match. Once I have it all in bits ill get photos of the 2 different looms and pin outs and label it all up and write up here what pin does what..
As the information on this thread is going to be invaluable to it, ill try and contribute :) |
ive got w-reg vtr crossover loom for sale if its any good to anyone
|
May be useful, pin out and electrical diagram from citroen dealer.
(for a 2000 vts 16v, 1plug) http://www.saxperience.com/forum/sho...11#post6175411 |
Quote:
P.S if you want to be really helpful start another thread with that in and it will likely get stickied |
Cheers mate! Unfortunately I lost my privileges to the citroen network when I left the company.
And I started another thread :D |
All times are GMT. The time now is 07:36. |
Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.