![]() |
Quote:
Pugdan - Will be doing the doorcards in leather to match hopefully in time for FCS ;) |
UPDATE - New skirt prepped up
Here's a few pics of my skirt after getting it for the bargain price of £12 at my local breakers ;) Thanks to everyone else who tried to help here tho and offered me theirs :y: ![]() ![]() ![]() Skirt being sanded and prepped for primering ![]() Paint stipper used before this. Great monkey halfrauds products shown ![]() Then wet+dry paper used from 800 grade upwards to about 1200 grit to ensure a smooth finish for the primer to bond to ![]() First layer of primer ![]() Second then third layers of primer on and smoothed ready to paint ![]() Sorry bout this last pic as its crap quality ![]() 2x300ml Grey plastic primer @ 5.49 = £10.98 1xpack Wet+dry paper assorted = £1.99 Paint stripper and some Isopon P38 + P40 for the bargain price of £3 Total spend today of £15.97 lol :P |
Tommorow's plan is to go and see silver_saxo and get it painted up with some custom made up paint to match
Then give it 3/4 good layers of decent, deep + glossy lacquer Will be fitted tommorow night and the car given a quick cleaning whore session for Sundays guilford meet ;) ![]() Cheers for looking everyone :y: |
NEW SKIRT - Part 2 coming soon!
Didnt have the time to go see silver_saxo so had to settle for a halfrauds jobby in the end End results and guide up later ;) |
looking good mate :y:
|
looking good mate. get some pics up as soon as its finished.
|
NEW SKIRT part-2
Had to get a custom paint made up at halfrauds in the end, which actually was a really good match and looked subtle but good in the end results Side skirt laid down after 3 coats of primer and being sanded, ready for the first coat of paint along with some other bits which i decided to do while i was at it: ~Heater grills ~Speaker grills ~Cigarette lighter element (dont ask why LOL) ~Pull out tray compartment ~Heater control knob ~Heater control sliders ~Fuse box cover (then decided against it) ![]() ![]() Most of my kit ![]() Every piece laid out sanded and ready for primer ![]() First few layers of paint done ready for one more then lacquer ![]() Every component laid out painted and ready for a some lacquer ![]() Some finished results after two/three coats of lacquer ![]() ![]() ![]() ![]() ![]() ![]() Components on the car ![]() ![]() Everything looks much better and more obvious on and in the car in the flesh and can all be seen at FCS Sorry for the quality of some of the pics as the conditions/light wasnt great most of the time! Side skirt is all finished and ready to fit but on Sat 23rd, night before the SE meet it wouldnt fit straight on so i will modify the mounts to fit soon and get some more pics up Cheers and enjoy, comments welcome! |
Some plans before FCS ;)
Skirt fitted Alloy refurb Boot build re-built with false floor and NEONs coming soon... |
Looking ace man!!!! Defently looks better in the flesh! You've gotta take me out somewhen!
If you do need a rad my offer still stands :y: |
Looking good mate. pics not really doing justice but looks good!
|
Quote:
Quote:
and pics to put up then when me and Crackers take both of ours out for a photoshoot :y: |
looking good mate !!!
|
Quote:
|
i love it!its a flaking car mate..the colour is unreal:clapping:
|
Quote:
Pics of yours, progress thread? |
Quote:
ya i have loads of pics of my vtr but im waay too lazy to put em up at the min.. pm me your bebo addy! |
Nice colours.....Good wheels...
|
Quote:
Any more comments/improvements? |
looks good, the cig lighter and the fan knob wont light up will they!!!, get up some better pics as i wont be at fcs :(
|
very smart mate ! think i might spray my speaker covers
|
Quote:
Be getting some chrome soon and new LEDs all over the dash so just a little DIY experimentation :p Cheers for the comments |
Quote:
|
Few updates today :y:
Kept meself busy with a few pre-show mods today and gave both cars a good clean in a 3 hour odd whoring session :p Finished side skirt ready to be fitted once i'v got some parts from my local Tates citroen dealers... ![]() ![]() Made a shopping list of what i need and this is some of it :p * Gromit for rear wiper * Skirt and body clips * Plugs * Washer * Screws Part 2 to follow ;) |
Part 2
Just come back from Tates Citroen with the parts and dropped past a huge halfrauds on the return trip for some more stuff Here's what the haul looks like (minus some more cleaning goodies which u'v all seen before, Meg's glass cleaner and trim condition and leather cleaner/conditioner) Old skirt holdings ![]() Nice shiny new ones £1.50 a clip, i was robbed LOL ![]() Skirt screws ![]() Halfrauds stuff ![]() ![]() Whole hoard :p ![]() And look what came in the post for next week;) ![]() |
Part 3
Last set of pics from todays work Managed to fix the exhaust today by re-welding it and replacing some sections of pipe that were rotten and shite. Also re-furbed the rear box at the same time and checked the whole system over, which now makes the system sound and run much better, more of a growl to the exhaust now :y: Also managed to de-wiper the rear screen and make a custom gromit as all of the ones i found didnt fit and were crap fit the new skirt that i made earlier then give her a good clean along with my other car by having a thorough whoring session ;) Here's a cheeky snap of the new subs for my fiesta ![]() I gazed out of the window between washing cars just daydreaming :p ![]() ![]() Skirt is finally on, nice shadow i know. First time shes had both skirts on (been fully dressed) in about 4 months:P ![]() ![]() Last couple of pictures of the rear screen :y: and yes its all reflection not dirt btw;) ![]() ![]() Going to return some stuff to halfrauds for the refundage and give the interior a going over tommorow before i colour code the door locks and petrol cap lock to make them blend in with the paintwork Wheel bearing will also be fitted this week and more prep to make sure shes tip-top for the show which means spending lots more money on cleaning and engine goodies ;) Cheers and enjoy, more updates soon Red |
Thoughts and comments please people?
|
Um.. It's shit.
Nah joke mate, looks like a stunner, love the pictures... Alloys could do with a refurb. Rest is nice and clean, keep it that way. :d (uncle has a refurb company... Would be about £140 for those 4 i think...PM me if interested) |
Very nice mate, agree about the refurb suggestion though
|
In the pipeline, got loads to fit in for Trax
Thanks though |
Gave her a good clean last night and the new rear lights and arial are on so will post the pics up later
Door and filler cap locks have also been sprayed black and the badges removed :y: |
nice and clean mate:y: saxo's coming along nicely:P keep up the good work:y:
|
Coming along nicely, on scedule for Trax i hope, want to see it done. ;)
|
Quote:
Alloys refurbed in a few weeks:y: finally Headlights and fogs resprayed also ;) Going to be a Trak beast at TRAX mate, although no passengers so we need plenty of videoage of me lapping Sayer especially :p Pics up tonight when i get home and have made my RIP fiesta thread for my old car lol Red |
Here are my old lights that i have just removed to fit the new smoked rears i have
![]() Comparison between the old and new lights, not very noticeable but subtle and i think there lush :p ![]() ![]() New short arial in place of the old 'weapon' of an arial that was fitted... ![]() ![]() Here you can see the huuuuge diffence in size ![]() |
More pics of the car...
Stupid deep angled shot that shows of the gloss ![]() Rear shot ![]() ![]() ![]() ![]() ![]() More to come later.... |
Last set of pictures
![]() ![]() ![]() ![]() Comments please :p? Next to come are alloys being refurbed Lights smoked Trip to the bodyshop to fill the wholes and sort out some aspects of the paint New suspension set up and coilovers Some well needed performance mods inc manifold and exhaust Stripping her for TRAX :A: Red |
looks mint mate. you've done a quality job on the cleaning!! have you whored the engine bay as well? would be nice to see some pics of that too if you have. good work!
|
red top work matey,will look mint at trax with all the gear youve been busy buying.looks like you did a good job of the skirt, and the car relly polishes up nice. look forward to seeing you at trax mate.
|
Engine bays getting a steam clean and full polish in the days leading up to TRAX
Thanks for the comments everyone, glad the effort iv put into her is starting to pay off, just hope someone doesnt bin it into me when we go on the track |
Quote:
Quote:
Want a GTI as a project next year but think i should just stick with the VTS and turn her into a track slaaag:p Looking forward to TRAX too mate, good luck with the new setup sounds very tidy :y: |
All times are GMT. The time now is 09:41. |
Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.