Saxperience - Citroen Saxo Forum - Advice on turbo setups :)

Saxperience - Citroen Saxo Forum (http://www.saxperience.com/forum/index.php)

- Saxo Engine/Performance (http://www.saxperience.com/forum/forumdisplay.php?f=12)

- - Advice on turbo setups :) (http://www.saxperience.com/forum/showthread.php?t=382703)

Not to mention there's at least two sets of full BE converted shafts for sale right now that I know of for around the £500 mark. Mine and Titchs... ;)

Quote:

Originally Posted by OllieVTS (Post 5378720)

Ive only got 300 in mind as that figure gets pinged about alot. Unfortunaty i dont have the time (or knowledge) to compare turbo's. Like i say i havnt been in any other pug turbo's so have no idea of how my turbo compares to others in the real world. Is the 2871rs bad enough that i need to swap it?

I think i'll get it mapped and set up. Then see how it feels.

All this means is that you deffo need to take me out in yours to compare :p

I have been out in a 2871rs and there is a bit of lag...

Quote:

Originally Posted by maddison_vts (Post 5378937)

bugger, I was hoping you'd have ran the ma for a while! I want to get a bit more power from mine but I don't know when would be best to call it a day, 200 atw proved to be very reliable and I'm slightly nervous about going for more power because of the extra expense it could incur.
The be conversion has always been something I've tried to avoid because I never wanted the expense of it, is it really worth it? Have you had any transmission related problems with yours?
Another thing putting me off the be is how much i spent on a friggin ma box by putting the quaife diff in it!

Paxo89 (dan) is running 222 atw on his turbo charged saxo, no problems as of yet, but to be honest, does not smash through gears on full boost and i do think the wheels spinning is helping him alot. Semi slicks on a warm day and there could be some problems!

I imagine if it has an open diff it won't have too many issues as once it wheelspins it won't try to regain grip!

Quote:

Originally Posted by maddison_vts (Post 5379052)

I imagine if it has an open diff it won't have too many issues as once it wheelspins it won't try to regain grip!

Thats right mate, just let it spin or change tbh. Its a shame in some ways that not all full power is able to go through and be transfered, however, i guess at the minute its saving him hassle! Also has a spare VTR box just incase!

One of his top priorities is to get the BE conversion kit from somewhere with a diff.

Bingo to the above really guys. Wheelspin will actually help prolong the life of the box in some ways - as you've highlighted if it doesnt spin but you still try an put the power through it, something else has to give way - normally 3rd gear ;)

Titch always said it was a mixed blessing going BE - he said the MA was the most fun thing he'd ever driven but at the cost of reliability. The BE is less raw but more reliable. From what I remember of brents (non diff, MA) that thing made a bee-line for the hedge everytime it saw a wiff of boost :D

Quote:

Originally Posted by RossDagley (Post 5379153)

Im running MA VTR box with a diff and trs driveshaft......

It still tries!

Arghh all this turbo talks wrecked my head now! Do i persist with the 2871rs or is it worth selling it now while its fresh and going for something else?

Im Going to make a boosted gearbox thread to try keep the box and turbo talk separate.

Check this out on ebay im selling item no 12073761506

Quote:

Originally Posted by deesvtsT (Post 5379172)

Check this out on ebay im selling item no 12073761506

doest work mate

maddison, u gunna rebuild the s engine with a bit more mmmpppphhhh, sweet.
im gunna be looking into the be conversion towards the end of the year, maybe we could help each other out.

How come on boosted cars people run header tanks? Is this something is needed?

Quote:

Originally Posted by jsdvtr (Post 5387886)

How come on boosted cars people run header tanks? Is this something is needed?

so you can use a better radiator.. the standard rad has an in built header tank which gets in the way of most applictations..
you will find you will need to move the rad forward to give you enough space. so one option is a diesel rad which uses a header tank.

Quote:

Originally Posted by dannygti (Post 5387889)

Ive noticed that the diesel rads are as wide as the normal vtr/s ones.

Was your header tank easily made danny? Want one that would sit on top of drivers arch.

i have a diesel header tank whish sits on drivers arch ;)

Quote:

Originally Posted by Mathias (Post 5387904)

i have a diesel header tank whish sits on drivers arch ;)

Got any pictures? I havent seen a saxo deisel one before so unsure what they are like.

Quote:

Originally Posted by jsdvtr (Post 5387895)

Ive noticed that the diesel rads are as wide as the normal vtr/s ones.

Was your header tank easily made danny? Want one that would sit on top of drivers arch.

i wouldnt say it was easily made but its not too bad. you have to take a few things into consideration but not rocket science. there are plenty of cars you could use one from.

will get some later for you its from a 105 1.5 diesel, it even mounts on the fittings for your ecu tray so just bolts straight on :)

seen lots of ppl use aer market renault 5 header tanks as theyre cheap and readily available

thsi is the one i have http://www.spoox.co.uk/catalog/produ...73ae71c76ad625

pm me if interested

how much?!?!

looks same as the AX Diesel one. Get down a scrapyard!!