any1 at all like the lexarse lights?

no :P

standard all the way, sorry :oops:

maybe spray them very dark so u cant see? haha

or standard ones :P

haha yer :D i need to install a bigger backbox :S anyone know anywhere that sells pipe reducers>?

id remove that bonnet it looks aweful and the raisers do too, stick with that back box mate but if you wanna go bigger i wouldnt go too much bigger, and definatly standard rear lights

4" would be backbox size and the raisers have been removed :S i currently have a catback on it so ill have ti get a bit of standard pipe for the cat to the backbox :D

yeh 4" would be alright about the same size as mine, sorry didnt notice in the latest pics the raisers ahd gone my mistake

not a probalem thanks for comment :D :drink::y:

4" backbox with straight-through centre section to cat/manifold and you're onto a winner !!

I'd not weld it as will be a bitch taking it on and off in the future. I'd just buy one that fits properly together! Will minimise the work you have to put into it, if you bodge a join it'll always leak etc.

its got a sports cat so im not sure on whether to straight through the system or not. the backbox was orginally made for a 1.4 saxo east coast. are they same diamter mm to mm for the fitting?

wouldnt know tbh.

Is the sports car welded to the centre section? OR does it have the standard joins in it ?

U gota love um low :D

only had a quick glimbz of it when i had it on a jack yesterday and it looked standard joints tbh. its dead small tho lol

go for a supersprint centre section with 4" backbox, or a Piper cat back stainless system.

the pipe for my saxo in diamter is 13.5cm all the way round and 4.5cm if u measure the width of the whole. so what u reckon a pipe reducer?

pipe reducer will have to be 5cm>4cm si it fits easy :)

as if im sure this is exactly the same size as the standard system

fitting bigger zorst tomorrow after i pick up parts. will post piccys :D
not welding it. as also my welders out of action atm -.-. anyway plan is to use pipe reducer 5cm-4cm and plently of clamps to hold it in place. hope this works :S

i know this backbox sounds very nice tho. hopefully aaron can back me on this when he heard it on my 106?

Chevs need to be posi blue to finish off the front and new reg plates :y:
Liking the Rim tape aswell mate - very nice :)
You just had to go show me up and buy a ripspeed player with 7 inch screen rather than 3 1/2" lmao
I really like the tint you have put on the lexus lights mate - keep away from the keep it standard crew mate :y:
Your 106 zorst was very loud I remember lmao
Get rid of the key scratch guards from round your locks mate

Haha put zorst on and it fell off :s haha n yh had to challenge you :)

nice job m8

Looks really nice mate, looking forward to when i can afford myself a VTR/VTS.

Cheers mate

Today removed single wiper conversion as i got sick of it :S. been trying to sort out little ningles with the car today such as

washer jets keep falling out. ordered new ones that fit on wiper blades

bonnet doesnt lock down as the popper isnt high engough. need to replace the hinges so it will lock as currently pins are doing all the work- hinges i missed delivery so theyre waiting at post office

Bonnet flew up a few days ago and cracked a bit of the side. this needs glueing back on

rear interior pannel keeps falling off so need to replace pins for this

tyre could do with changing. However im buying some alloys now anyway :):afro:

i ALso fit the exhaust in a hurry and didnt secure it properly. went on a 80 mile trip and 2 miles from home it dropped off -.-. so that needs refitting asap for now my peco's back on

Juast little cheap niggles that are annoying me tbh

In other news i removed the chevrons and fitted a alarm :D:boxing:

Good work !!!

Sounds like it's slowly getting there tbh !!!

yes mate hope so :) the bonnet sits like a inch of the catch but when the bonnet flew up it bent the hinges anyway hense new ones. the snapped of bits should easily glue back on and paint over with a bit of matt black :)

what sort of alarm mate?

didn't the bonnet pins stop it flying up? Get some aerocatches as they are lockable so the bonnet wont go anywhere

forgot to lock pins down haha alarm is one of ebay. not expensive but better then nothing!

http://cgi.ebay.co.uk/REMOTE-ENGINE-...item2c4d96b68d

mite get some aerocatches. seem a bit more road worthy :)

NEW LIST OF MODIFICATIONS FOR FEB 10

locking aerocatches
oil catch tank
alloy wheels
pink brake calipers



ALSO FIXED ALL LITTLE NIGGLES. BONNET POPPER NOW LOCKS BONNET DOWN AS IT SHOULD. INTERIOR PANNEL IS REFITTED WITH CLIPS AND I SPENT A WHOLE DAY AND NIGHT WITH THE DENTED BONNET ON SO I COULD REPAIR THE FIBREGLASS ONE :) HAPPY DAYS

Not a fan of bonnet mate, think it ruins the car.

Each to their own mate but sorry to disspoint u :drink:

a few piccys of me and the grandad fixing the car :y:







A FEW PICTURES I FOUND OF THE CAR IN SHOW :y:







OLD PICTURES. SUPRISE TOMORROW :y::drink::fcuk:

Just need to colour code ur VT kit or maybe gloss black them?

love ur pics :)

:) thanks

Mods postphoned until march to gather funds and do all in 1 go rather then little bits and pieces
mods are
black multispokes
pink calipers
aerocatches
few stickers to look quite tracky

Nice car

De-wiper the rear Corey :p
Also I thought you already had a load of new stuff for the motor going on?
:clapping:

It is now mate my torx came yesterday I had bumper xmember and all repair parts and they where put on a couple of weeks ago? Tbh mate ain't doing much else to it now just aerocatches calipers and change rimtape to pink that's about it tbh I've got everything done now and can't be bothered to do much else tbh

Wheels need spraying + maybe roof?
Then you need to move onto tarting up your interior and bay :y:

Yeah :) dunno what can really do tho tbh it's already coded and I've put a blue bulb in the interior light. Wouldn't mind a race wheel and some digital dials tho. As in digital and no clocks. But that's just a thought. what can I do for interior? And the bay isn't that just samco hoses and strut brace with a chrome mani and a painted alternator?