thanks for this information. when i get this done would you be able to give me more information on the parts that need dressing?

Where can i get the hoses for the feed and refurn for turbo? Im struggling to get a mani, how hard is it to get a stardard one and get the adapter and get it welded on?

oil feed and return you mean? or water?

Well the oil feed and return that goes from turbo to sump, etc. Im just looking at where to get all the little bits like that i need to get. As i know the likes of cituning do braided one in there kit.

Im struggling also on boost pipes to go to intercooler and trottle body. I want one to fit my 5th injector and bar map sensor in.

boost pipes: http://cgi.ebay.co.uk/2-SILICONE-TUR...d=p3286.c0.m14

these will obviously need to be cut and rewelded where necessary

elbow: http://www.gmcmotorsport.co.uk/index...roducts_id=208

for oil feed, there are braided kits on ebay, they are from abroad so may be a wait but pretty cheap :)

Also you after an intercooler? I have a gmc one for sale - bargain price too!

Well i coupd fit the injector in the elbow couldnt i? Where about would map sensor go? I would buy thel intercooler but after selling nos bottle as dont want run nitrous now, would prefer money to go toward turbo setup. Would that intercooler not be too big for lw boost?

Yes mate, injector would fit in the elbow, you can see where it fits in the picture.
The intercooler wouldnt be too big, it would keep the inlet temps nice and low which would help massively

If i can get rid of the bottle then might be interested. All ive got so far is mf2, injector, 2 bar map sensor and sigcon.

okay matey, let me know, may not be here that long

If you can supply lengths and end union thread sizes i can supply the braided lines

what sort of prices you charge?

With out an exect spec its hard to say
id say around £20 deliverd

per hose? was going to edit as i aint got my turbo yet so not sure on size and fitting as of yet but will be in touch when i do, what qaulity are they?

Yes per hose.
Got a link to the ebay ones?
Motorsport quality, very good same as the brake line kits i supply.
Can do a full internal bias valvd kit no problems

will be in touch when ive sorted the turbo out mate :)

Any chance of a response to my emails and pm's before you sort all these hoses out for everyone else?

What if went for a vts, Would this not fit that then?

Cant see why not mate, you'll need to ring and ask for diameter of the elbow to see if it matches for the vts tb?

Well its just i was going to vts the car and gave up then going to turbo the vtr but would like the extra power and was only going to get a standard mani so not spending alot on a mani so in the future can turbo the vts without losing loads on a good manifold,etc. But if i find a good vts engine by time got all the parts i will fit that then turbo that as got all bits for a vts engine, just not the engine lol. You dont fancing a swap for nitrous bottle +cash for intercooler lol?