Peterborough meet last night, pics up in photos section. Few pics of mine

Few Pics from the other day, saw an opportunity for a snap :P

Also these will be the last pics of the car sitting like a tractor!

BOOKED IN FOR LOWERING TOMORROW AT 8-30.

Being lowered 60mm front on SPAX and 50mm rear on GMAX with torsion bar.

Last pics till tomorrow

Looking good there!

Rimz Inc. still have my car as they also needed to replace the link bars aswell as the front springs, rear dampers and torsion bar.

So will have to wait till tomorrow to pick it up and get some pics! :P

Booo, you do know how to keep me biting my nails.

hahaha you're telling me! They've kept me waiting tooo long..can't wait till i get a phone call tomorrow :P

Looking good there! .........................:p:p

Argh they have failed to remove the torsion bar, so will not be able to lower the rear :(

However, front is lowered, link bars are fitted and rear dampers are on, so not all is bad. Picking the car up at 5:00.

Pics then.

im sure they could get it out eventually :(
oh well might just need to book it in somewhere else and try them :y:

what you mean they could remove the torsion bar!!

sound like they didnt try hard eunf!!! get down to kj near the test centre he will get the torsion bar out!!! he is gd like tht!!

these rimz.inc company dont sound that great to me at the moment, anyway hope you get it sorted :y:

andy

get that shit lowerd y0

got it back now, and i'm well chuffed, the diffuser keeps the rear looking low, and the front is decked lol. My mum and dad have gone out with the camera, so ill have to keep ya waiting a little longer :P

Andy, they spent all day today, and yesterday evening trying to remove it lol. Someone's had a go at it before, and cross threaded it, so it wasn't easy getting hold of it. He actually broke one of his slide hammers trying to remove it!

To be fair, they've been a pleasure to deal with.. if there were any problems they let me know, and eventhough it wasted the whole of today, they didnt charge me extra.
Might get Wilsy to have a crack at the torsion bar another day.

Id reccommend RimzInc to anyone :)



Pics this evening

mate!! that cnt b good..
looks like that diffuser ent too bad an idea atm then if it making rear look lower and not so out of place lol..
hurry up with these pics!! lol..
and being down 60mm rnd pboro reli ent preti sumtimes lol..
enjoy tho :)

As promised, pics



:P

They put a sticker on for me too :)







Put this on the other day too, underneath the 3rd break light



Also have pics from stripping and carpetting the rear :D

looks good mate, when the rear is done it will look so much better

like i said tho take a trip to KJ near the test centre, he will do it, he really is good at making a shit job good, my old torsion ( not on my car no more) was crossed thread adn have different thread size in it and he satill got it done for me,


on a different note looking good really need the back end down now to complete it, look so much better once done :y:

andy

Not sure, i think he tried to do the notches way, not removing it. But not sure. How much do KJ styling charge?

Thanks mate, looks better in person than in those pics :) Might put the rear bench back in to lower the rear a bit more..

happy though :)

notches is the incorrect way to be doing it,

also KJ is about 50 quid, and does a good job, and will 99% get un siezed bars out and sorted!!

Andy

reli need 2 get the rear done mate..
looks slightly at an angle lol..
front looks good tho..
will look wiked when the rears done:y:
id b pissed if sum1 put a sticker on my car without asking..
get a refund 4 the inconveneince mate :P haha
looks loads better tho..

yeh wil enquire this week at 2 places which claim they can do the rear. Looks awesome though...

Got a carbon enclosed induction kit with samco hosing and Green Cotton air filter today. Cleaned, Re-oiled and put together. Going on tomorrow with pics :)

u can have a play about at hw the hell u fix those bloody enclosures on and then we'll have a go at mine yea :y:
lol..

Ha it was an absolute mish! A lot of cutting, moulding and messing around to get it to fit.
It's cause that ^^^ was your 666th post! Was bad luck, you jinxed it! lol
I'll help ya with it anytime mate.

Uploading pics now

New Induction with Green cotton air filter






Few other shots

lol at the cda stickers.. they andys from wen u got the K&n yea?? lol..
looks reli good in ther mate..
engine babe looks even sexier than with the K&N..
bet ur kinda glad it borke haha..
hws it sound? and wats peformance like??
we'll have to give mine a go :y:

haha yeh well i thought they were included in the deal! That was the deal breaker!
Yeah im well happy with it, looks so much better.
It roars more when you open it up now, and feels quicker too. Even more so than the KnN.

Yeah, im sure we can fabricate something to fit your raceland mate :y:

Anyone know what make the enclosure is? its not the raceland one, and i coulnt see a brand. It has a green cotton filter.

swwwwweeeeeet car

lookin good m8

my stickers!!! :(

look good!

andy

Thanks for the comments :)

I have booked it in at KJ styling for the rear end to be lowered on Friday. Pics up then...Hopefully

like the angel ayes mate :D

ha sold as seen! They were what swung the deal tbh :P

Thanks mate, they transform the front imo..

Looks well nice especially engine m8 keep it up! :y:

Thanks boss, will do :)

your car is looking amazing, especialy in that last pic of the front:y:

yer i guess you got the better deal then miss my sticker :( lol

yer he a good bloke should be able to do it for you :y:

andy

9:00 am tomorrow i am dropping it off for a second crack at the torsion bar. Hopefully pics tomorrow! After lowering is complete, next mods are pressed plates and colour coded bump strips.