Saxperience - Citroen Saxo Forum

Saxperience - Citroen Saxo Forum (http://www.saxperience.com/forum/index.php)
-   Your Saxo Photos / Videos / Progress Reports (http://www.saxperience.com/forum/forumdisplay.php?f=19)
-   -   >>> TwoTone Mauritius R <<< Written off :( (http://www.saxperience.com/forum/showthread.php?t=165007)

Rob-6 2nd February 2009 19:46

yer definatly will look good!

benJee_VTR 2nd February 2009 19:48

Quote:

Originally Posted by robvts20 (Post 2947582)
yer definatly will look good!

probably will put it on, just got to wait to get the car to a garage :)

dorsetsaxo 3rd February 2009 16:32

great thread but please lower it and it will all come together then, keep the two tone tho its really good to see summit different

Tom5190 3rd February 2009 16:56

looking good, must lower it though!

benJee_VTR 3rd February 2009 23:21

Thanks for your comments guys, like i said, i have a full Gmax 50 mm lowering kit ready to go on, but it's 50/50 whether i'll put it on or sell. hmm decisions.

saxokid100 3rd February 2009 23:21

Quote:

Originally Posted by benJee_VTR (Post 2952426)
Thanks for your comments guys, like i said, i have a full Gmax 50 mm lowering kit ready to go on, but it's 50/50 whether i'll put it on or sell. hmm decisions.

Keep it dude............:y:

Ben 3rd February 2009 23:23

New wheels look awesome Ben, just needs lowering :)

benJee_VTR 5th February 2009 17:54

Update: New stealth parcel shelf and boot build (plus more snow)
 
Woke up this morning to a good 6/7 inches of snow, so i thought i'd do something productive today :A:

Snow:





Firstly made a re-inforced parcel shelf, which i cut holes in and covered with ice black carpet. The underside was meshed to protect the Vibe Slick 6x9's which were put underneath.

as you can see, it looks standard from above :)

The speakers were then screwed onto some black MDF and then screwed to the underside of my parcel shelf.





I then got out my extensive blueprints for the boot build, which was drawn at work :P

I planned to build a false floor which hides my wiring kit for the sub and also incoorperated a hideaway cubby hole to house my loose bits and bobs.

False floor was cut to size, and my dad and I screwed a runner near the edge to keep the scissor jack in. It was then trimmed in black carpet.

No progress pics, just the finished result :)


I also had a cold cathode neon accent light to put on the underside of the parcel shelf, but my cigarette lighter stoppped working.

As you can see below, the 6x9's sit underneath the parcel shelf and can't be seen from outside. The sound is still good because only the mesh and thin carpet covers them :y:


This pic shows the runner we made to house the jack



We threaded a rope puller through the top of the cut-out section for easy access.


As you can see, the section is practically invisible against the rest of the floor. Tight as a ducks arse.


This pulls away revealing my odds and sods.



Finished result :)



Before:

After:

benJee_VTR 5th February 2009 20:15

hopefully new rear diffuser, gear knob gaitor surround and possibly GMax 50m lowering kit to come this week. :)

benJee_VTR 5th February 2009 22:12

Still not sure about lowering it though. Seems like it would put added pressure on the drive shafts..and it's just reached 100,000 miles.. cant really afford to fork out for any more repairs, specially after i've just bought new clutch and gearbox!

What do people think? would it be worth it?

Ben 6th February 2009 01:35

It WILL be worth it, it'll look 100000000000x better lowered mate. It honestly makes that much of a difference, not just in looks the handling would be a lot better also. Just a subtle 40mm wont add too much pressure to the shafts. Good updates aswell Ben, done a really good job tbh.

xthedavidx 6th February 2009 09:43

I likes it :y:

benJee_VTR 6th February 2009 15:13

Quote:

Originally Posted by bensambrook (Post 2961411)
It WILL be worth it, it'll look 100000000000x better lowered mate. It honestly makes that much of a difference, not just in looks the handling would be a lot better also. Just a subtle 40mm wont add too much pressure to the shafts. Good updates aswell Ben, done a really good job tbh.

Cheers mate, appreciate it :) i more than likely will lower it..as soon as it warms up a bit!

Quote:

Originally Posted by xthedavidx (Post 2961734)
I likes it :y:

Thanks mate :y:

Lippy 6th February 2009 23:08

car is getting better by the day! Really didnt like it when you first got it! looks like you are putting in the effort to bring up to scratch though!
Like the wheels! are they fiesta ZS phase 2 alloys? look like it!
Rocker cover needs attention, yours needs lowering like myne! lol

silversaxo113 6th February 2009 23:26

il have that gmax kit if you decide to sell mate but keep it yaself car looking realy good absolute bargain for what you got it for :)

carlporter 6th February 2009 23:29

getting there mate lower lower lower but nice

benJee_VTR 7th February 2009 12:57

Quote:

Originally Posted by Lippy (Post 2964739)
car is getting better by the day! Really didnt like it when you first got it! looks like you are putting in the effort to bring up to scratch though!
Like the wheels! are they fiesta ZS phase 2 alloys? look like it!
Rocker cover needs attention, yours needs lowering like myne! lol

thanks a lot mate, i wasnt too sure when i bought it either, but i saw the potential and hopefully im going in the right direction :D

Quote:

Originally Posted by silversaxo113 (Post 2964786)
il have that gmax kit if you decide to sell mate but keep it yaself car looking realy good absolute bargain for what you got it for :)

Cheers buddy, i probably will use the kit, but you have first dibs if i sell it :y: I know, absolute billy bargain!
Quote:

Originally Posted by carlporter (Post 2964792)
getting there mate lower lower lower but nice

Thanks mate, appreciate the comment :y:


Bought a remote gain controller and extra RCA's to be wired up for my active sub, so will try and do something trick with that later. Am also going to wire in a neon accent light into my interior light for the boot build.

Pics to follow at some point :)

-Richard- 7th February 2009 13:08

nice work on the boot build

benJee_VTR 7th February 2009 21:29

have fitted accent light, quad led in boot and bass controller today, pics to come tomorrow :)

benJee_VTR 7th February 2009 22:32

Quote:

Originally Posted by -Richard- (Post 2965983)
nice work on the boot build

cheers mate, wanted it to be subtle. nice place to hide my locking wheel key too :P


All times are GMT. The time now is 22:14.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.