Saxperience - Citroen Saxo Forum

Saxperience - Citroen Saxo Forum (http://www.saxperience.com/forum/index.php)
-   Your Saxo Photos / Videos / Progress Reports (http://www.saxperience.com/forum/forumdisplay.php?f=19)
-   -   >>> TwoTone Mauritius R <<< Written off :( (http://www.saxperience.com/forum/showthread.php?t=165007)

benJee_VTR 30th July 2008 23:00

>>> TwoTone Mauritius R <<< Written off :(
 
I've had my Saxo for over a year now so I thought it would be about the right time to create my progress thread.

It bought the car for a knockdown £450, with 95,000 miles on the clock, 15" TSW alloys, alpine head unit, Vibe Slick 400w 6x9s, peco backbox and an pipercross (i think) air filter.

Here it was as i bought it.







The first thing i did was respray the interior trim components, the vents, the speaker grilles and the center section were all flatted off and sprayed silver.




Next I had to sort the engine management light and give the old girl a full service, including oil change, oil filter, fuel filter, spark plugs, new front discs and pads all round, topping up all other fluids, and a general clean up of the engine bay. Ran injector cleaner through the system and also a new gear knob, number plates and lexus lights :oops: were fitted shortly after.



Next I thought I would upgrade the standard sound system with Fli Componants with directional tweeters for the front and a 1000W Fli Active Sub with built in Amp for the boot. These along with the infamous 6x9s sound quality, and im really happy with them :y:.





Next i repainted my calipers from yellow, to blue, and my rocker cover blue to keep with the theme.




More to come tomorrow, its taking longer than i thought lol.
:zainy:

benJee_VTR 30th July 2008 23:02

Decided that the blue was too light, so re sprayed in Dark blue

Elliott 30th July 2008 23:03

Looking good mate.
Remove the lexarse lights and lower it and it should look good imo. standard lights ftw!

benJee_VTR 30th July 2008 23:05

Next i bought a smily grille from an ebay shop, and sprayed it blue, as i thought there was a bit too much silver going on the front end

from this

To this

benJee_VTR 30th July 2008 23:06

gave her a good wash and polish (Autoglym Deep Wax)



benJee_VTR 30th July 2008 23:07

Next, went standard with the lights, and smoked them to my taste :)




benJee_VTR 30th July 2008 23:09

Then removed the door pillar tape :)





benJee_VTR 30th July 2008 23:10

Got shot of silver wipers and refurbed originals as they were flakey



from these


to standard :)

Ben 30th July 2008 23:13

Gettin better, anymore?

peteVTR 30th July 2008 23:14

looks good matey

MrHouston 30th July 2008 23:14

Good progress mate, how come it was so cheap?!?!

Ben 30th July 2008 23:15

Quote:

Originally Posted by MrHouston (Post 2381051)
Good progress mate, how come it was so cheap?!?!

Mileage probs

benJee_VTR 30th July 2008 23:16

Next step was window tinting. Used self tint which came out perfectly, just requires patience and a steady hand :) Gives quality results :y:




Bought saxperience stickies :D


benJee_VTR 30th July 2008 23:20

Still coming lol, bare with me :)

benJee_VTR 30th July 2008 23:23

It was cheap because the guy who i bought it off got done for drink driving and couldnt afford the insurance. MOT was nearing and tax was running out so he wanted a quick sale. It was originally up for 1200 but i got it for 450 in the end :)

benJee_VTR 30th July 2008 23:25

Next i bought some VTR alloys from Aterro (cheers buddy) to replace the TSWs.




Ben 30th July 2008 23:27

Again lookin a lot better everytime you put new pictures up :D

benJee_VTR 30th July 2008 23:27

Unfortunately, the wheel bolts were completely wrong and looked shabby anyway, so i invested in a brand new set of shiny bolts.



one in


Much better :)

benJee_VTR 30th July 2008 23:28

Quote:

Originally Posted by bensambrook (Post 2381089)
Again lookin a lot better everytime you put new pictures up :D

Cheers matey :y: appreciate it, more to come :P

Ben 30th July 2008 23:28

I'll be waitin to see :P

benJee_VTR 30th July 2008 23:30

the other day all my electrics cut out whilst driving, then car wouldnt start once id stopped :( woops, new alternator and cam belt please





Only got it fixed today, but im back on the road now :y:

benJee_VTR 30th July 2008 23:35

Oh yea forgot to mention, changed the rocker cover gasket when i painted rocker cover :P

Ben 30th July 2008 23:36

More, more :P

benJee_VTR 30th July 2008 23:38

Also painted manifold cover and ECU cover silver, to clean up the engine bay

benJee_VTR 30th July 2008 23:41

Few Pics after a good clean







Before:



Today :)




Ill update again soon :) (but not today)

benJee_VTR 30th July 2008 23:43

oh yea, future plans maybe:

Lower 40/50mm
Refurb alloys (maybe change colour to anthracite/white/polished)

Let me know what you guys think.
cheers :)

Ben 30th July 2008 23:45

How about a little MK1 or MK2 spoiler to it? :P De wipered? Badges removed? 40mm is good man, mines down 40 perfect imo


benJee_VTR 30th July 2008 23:49

hmm yeah i like the sound of those ideas, i am fancying a spoiler like you said... i did consider de-badging the rear... how do you lose the holes without fillering and respraying? or are the holes not really noticeable?

Dewipering is a possibility...

Cheers bud

Predator_R32 30th July 2008 23:50

not sure on the two tone on it really, badge on the grill off, the rocker needs spraying and not painted with a brush lol

benJee_VTR 30th July 2008 23:50

Cherry foot air freshener ftw :P (2nd from last pic)

Ben 30th July 2008 23:51

Quote:

Originally Posted by benJee_VTR (Post 2381148)
hmm yeah i like the sound of those ideas, i am fancying a spoiler like you said... i did consider de-badging the rear... how do you lose the holes without fillering and respraying? or are the holes not really noticeable?

Dewipering is a possibility...

Cheers bud

You would deffo need to get them filled and resprayed, otherwise you could just spray them a different colour, or tcut them black. But yeah the holes are noticeable so i wouldn't just pop them off. Cost me 70 quid to have it done. Yeah people keep tellin me to get mine dewipered, but i like my wiper, may get a MK2 one as they are better looking!

benJee_VTR 30th July 2008 23:53

Quote:

Originally Posted by Predator_VTR (Post 2381154)
not sure on the two tone on it really, badge on the grill off, the rocker needs spraying and not painted with a brush lol

Yeah i painted it with a brush the first time with the light blue, then sanded and sprayed the second time dark blue... could have spent more time on it but im quite happy with it :)

I wasnt sure on the two tone, but it's grown on me and i love it now, was gonna get a respray, but its really different and looks lovely when its cleaned and waxed :)

benJee_VTR 30th July 2008 23:55

Quote:

Originally Posted by bensambrook (Post 2381158)
You would deffo need to get them filled and resprayed, otherwise you could just spray them a different colour, or tcut them black. But yeah the holes are noticeable so i wouldn't just pop them off. Cost me 70 quid to have it done. Yeah people keep tellin me to get mine dewipered, but i like my wiper, may get a MK2 one as they are better looking!

Yeh same, my rear wiper is quite handy lol but mk2 ones are a lot more modern and clean looking... i might tcut or spray the badges temporarily as iv got other things to spend money on atm :)

benJee_VTR 31st July 2008 00:05

Before I bought the VTR alloys i got a few photoshops (cheers Saxokid) done to see what different alloys looked like with colour coded bodykit.




Then someone did this one for me lol

Aaron 31st July 2008 00:57

vtr wheels look good mate:y:

benJee_VTR 31st July 2008 18:01

Cheers buddy, they set the car off so much better. Now that i've got smaller wheels on, hopefully lowering soon :y:

saxokid100 31st July 2008 18:03

Quote:

Originally Posted by benJee_VTR (Post 2381167)
Yeh same, my rear wiper is quite handy lol but mk2 ones are a lot more modern and clean looking... i might tcut or spray the badges temporarily as iv got other things to spend money on atm :)

Coming on realy well matey!!! keep up the good work....:y:

Wayne 31st July 2008 18:08

Looks very good buddy:y: looks spot on so far:)

benJee_VTR 31st July 2008 18:21

Quote:

Originally Posted by saxokid100 (Post 2383664)
Coming on realy well matey!!! keep up the good work....:y:

Cheers mate, its nice to get positive feedback:)

benJee_VTR 31st July 2008 18:22

Quote:

Originally Posted by Wayne (Post 2383681)
Looks very good buddy:y: looks spot on so far:)

Thanks matey, appreciate the comment :y:

Hopefully more to come in the next few days :P


All times are GMT. The time now is 21:48.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.