![]() |
Remember me??? now new car
Hi guys,
dont know if you remember me i used to be on here about a year back i had a vts with a few mods, wheels, lowered, filter ect ect just thought id pop over and show you my new ride heres a bit of a spec list ect ect aquired the car about 3 months ago from a well known member on imoc {bry} the car had covered 48600 miles now its split a piston ring at 51000 miles on the way back from jae. currently going through a full rebuild full spec below.. going for around the 450/470bhp mark ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() now for spec ENGINE Power Enterprise Turbo PE1919* Pheonix Power Intercooler* Blitz Air Filter* Blitz Decat* P.P Departure 2 Exhaust* Apexi Power Fc ECU* Rouge Systems Engine Fans* HKS 1.2mm Head Gasket APR Head Bolts APR Flywheel Bolts APR Main Studs Clevite Bigend Bearings Clevite Main Bearings Clevite Thrust Bearings Eagle H Beam Conrods CP Forged Pistons 86.25mm Std Size Fensport Blue Oil Catch Tank Remap Power FC FUELING Sard 800'cc injectors* Walbro 255 Fuel Pump* PUMPS GASKETS AND OILS Oil filter Fuel Filter Kelvar Cam belt Tensioner bearing Idler bearing Oil pressure switch Rocker cover gasket Rev4 gasket set Distributor cap 5mm leads Rotor arm Water Pump Oil Pump Alternator belt Aircon belt Millers Running in oil 10/40 Exterior...... TOMS side skirts TOMS rear bumper TOMS rear wing Interior........ S2000 start button Recaro SPG fixed race seats 4 point fixed harneses Reverse glow dials Suspension & Drivetrain ORC Flywheel* RPS 495lft Clutch* Cusco Front Strut Bar* Cusco Rear Strut Bar* Front Lower Tension Arm Brace* Tein Flex Coilovers* TOMs Pillowball Tension rods Front* TOMs Pillowball Tension rods Rear* Urethene Engine Mounts* Urethene Gearbox Mounts* Urethene Suspension Bush Kit* Wheels BBS 2 peice LM split rims Referbed black centres polished lip 17x8 Front 17x9.5 Rear Tyres Goodyear eagle F1's all round staggered set up Gram Pro 40g lightweight wheel nuts Hope you all like it :}' |
I dont remember you mate, but nice car. Whats it running?
|
dude very nice car mate im sure the ppl that dont know u will remember u now :clapping:
|
Hi mate, lovely car there, the silver and black go really well, stunning, were is that first picture taken?, is it Castle Howard?
|
looks noiceee i really good looking mr 2
|
Dont remember you mate, normally i dont like MR2's but that is defo the nicest looking one ive seen
Awsome :) |
dont remember you either
its really nice mate, but the exhausts really let it down |
nice, was that also posted on ssc a bit ago? im sure iv seen it before
|
Don't remember you and I can't see the pics..... bummer... What is it?
Chris :) |
its a toyota MR2 GT Turbo chris :y:
|
and it looks the sex chris :)
|
yes mate nice car :y:
|
cheers for the comments guys, iv been away from the saxo sceen for a bit now, pics were taken at a old mannor house in essex
the rear wing is genuine toms {very rare} and the exhaust is proven to be one of the freest flowing exhausts for the mr2 and is also ubbar rare being a genuine item, theres a few bits on the car thats now discontinued hard to come by. when its been built and mapped im hoping for around 430fly then if thats not enough its just a matter of changing to a gt30 for around 470bhp, it was origanaly running just under 400bhp at 1.3bar so will be interesting to see what power the pe1919 turbo makes at say 1.7bar as no one really knows its a pretty rare turbo direct from power enterprise in jap land |
Quote:
Chris :) |
mk2 chris :y:
id say it would look better with just one exhaust, just looks really chavvy with 2 |
1.7bar, that's pretty high, but if you have a built block should be no problem.
|
Quote:
Chris :) |
lovely mr2 mate:y: nice engine bay:)
|
just wait till you get home chris :p
|
VERY tidy car....i like it alot
|
that has to be the nicest mr2 ive ever seen, normally kits look ghey on them, that looks good, spoilers normally look shit, i like that one, and the wheels are always wrong, but i like them
|
,agh cheers guys:oops:
should piss 1.7bar the bottom end will hold 2.2bar but the turbo is the restriction.. new additions will be Head ported and polished HKS Adj cam pullies HKS Cam 264 Inlet HKS Cam 264 Exhaust HKS Valve Springs Ferra S/S 1mm oversized valves when funds allow, the botton end has cost me a total of 4k bit skint now lol |
Don't remember you!
Nice motor though. Good work:y: |
Looks awesome mate! The seats are sexual! Like mine but red-any interior pics please?
|
dont remember you sorry!
nicest mr2 iv seen though! |
piccys from a recent photo shoot
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
PORN! i luv ur car m8, luv MR2s,
|
The exhausts look SHITE, mate.....
imo. |
:clapping: thats a nice looker
|
really really nice you show off
|
not too keen on exhausts
that red ones dog shit |
Thats luuussshhhh mate, i like that alot, and i love those exhausts :y:
Martin. |
Quote:
|
Quote:
not many euro on here, and its down to peoples tastes on what they like |
Best mr2 i've seen.... The zausts don't look to bad in my opinion. I've seen allot worse, at least there on a tidy car.
Always loved mr2's tbh. |
Quote:
|
It dose look lush and some good photos too.
|
Quote:
|
Quote:
|
love it, very nice car mate, personally i think them exhaust look sweet.
|
All times are GMT. The time now is 10:21. |
Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.