Raceland or Simota enclosed induction kit?
Hi,
I'm looking to get an enclosed induction kit, I had my heart set on the Raceland enclosed one with the green filter, but after seeing mixed reviews about it on this forum with some people saying it doesn't fit properly and htey've had to make DIY clamps etc., I've started to consider getting a Simota now. Is there any difference in structural build/parts included to make it fit properly etc.? Any help/advice would be much appreciated, as I'm well and truly stuck! Thanks in advance |
simota cost more yeah?
prety much the same. id look out for a green second hand or jjust standard filter and buy a manifold with money saved |
thanks for the advice bullit, i'm still confused as to which one i should get, ill need to have a good think
|
There can't be a huge difference in performance gains between the two ...
|
thanks Fergie, but it isn't so much the performance difference i'm confused about, its the whole fitting process etc. it seems as though alot of people have had fitting problems with the Raceland, and have had to make their own clamps,brackets etc.
Quote:
|
Yeah you are right ... Racelands are quite difficult to fit and normally mean having to make your own brackets and mounts.
I've got no experience with the Simota but i'd imagine it's a better fit as it's more monies. If the Simota is going for more than £100+ you might as well save a little more and get a BMC CDA. |
Yeah you are right ... Racelands are quite difficult to fit and normally mean having to make your own brackets and mounts.
I've got no experience with the Simota but i'd imagine it's a better fit as it's more monies. If the Simota is going for more than £100+ you might as well save a little more and get a BMC CDA. |
yeah, you're probably right - thanks
Quote:
|
raceland are just simota copies either or will need some modding
|
thanks to everyone whos helped me on this, not perhaps i'm looking too much into this, but what would you guys recommend, BMC CDA or a Raceland\Simota enclosed induction kit?
Thanks in advance |
Buy my BMC & silicon hoses for perfect fitment :y:HERE
|
thanks for the advice, but it won't let me access that link! :(
Quote:
|
also, could you recommend/link me anywhere where to get the BMC and silicon from?
thanks Quote:
|
Think your post count is too low to view the classified section of sax-p :(
Here's some images of it fitted. There are no off the shelf hoses you can buy for the BMC unfortunatley, I had to get two made to my dimensions and cut it down to size, see below pic PM me if your intrested. |
great post - thanks, pm on its way!
Quote:
|
That looks like it will hinder performance if anything lol..two 90 degree bends in it
|
go raceland , they're a bit cheaper
|
do you have a Raceland? If so, what problems with fitting (if any) have you had?
thanks Quote:
|
confirmed: i'm getting the BMC CDA :)
just need to get the cash and sorted! :panic: |
Quote:
Thanks |
All times are GMT. The time now is 11:26. |
Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.