4 Branch Manifold
Just curious as to how much bhp the 4-2-1 manifold would give a saxo VTR
|
3-4bhp at the most mate! but it will free up the revs no end buddy, i've got one on mine!
|
the manufactoer states most 4-2-1 will give *UP TO* 10% more power low to mid range.
|
Quote:
|
it will rev through the gears slightly quicker and be more responsive
|
well tbh mate, if you bothered to search before you posted, as you should ;) you'd know the answer already :p
but on this occasion, i'll wipe your bum for you :p http://www.saxperience.com/forum/showthread.php?t=55219 any info you need will be in that thread ^^^^^^ |
wont give much horsepower mate will just free up the revs low down, id say 3-4 bhp like said
|
hi there i bought a pro tech 4-2-1 branch tubular race manifold from ebay. when the manifold goes on but it just sits on the alternator wires is there any way around this
|
was it definatly a VTR manifold you bought.
|
i got a saxo vts 2002 it was it was definalty for a vts 2002 it goes in fine but the gap betwen the wires on the alternator is only about 7mm c do you think that will be all right or is there a way round this
|
sounds like youve bought a dodgey mani mate...if its for a 2002 vts n thats wat u got it should fit? :S if not contact the ebay guy and see wat he says??
|
or check the wiring to your alternator is correct
|
it will run smoother and better.
|
Quote:
Don't always believe the marketing hype as those are often inflated claims that most people will not realise. If you purchase a decent manifold you will get gains everywhere in the rev range. |
Phase 2 manifold with no cat
I have 03 saxo (phase 2). I want to fit a 4-2-1 manifold without a cat. Iv been told a phase 1 manifold will fit but the oil filter might need moved. Do u know if there is a supplier that sell phase 2 manifolds with no cat or what I need to do to make a phase 1 fit?
|
shurruupp
|
u can get mk2 maniolds of kam racing..... http://www.kamracing.co.uk/index.php/
|
All times are GMT. The time now is 12:25. |
Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.