|
Cleaning plan
right this is my cleaning plan, can people say what else i need to do and what i am doing right and not right.
soak in Maxi Suds using Spray adaptor on end of hose pipe rinse wash with maxi suds using wash mitt and 2 bucket method rinse dry with Sonus towels clay if needed with Megs clay kit, followed by wash and dry polish using UDM, polish PB 2.5 SSR or/and Blackfire 300 gritt polish buff with MF cloth seal using PB Wet Look sealent x2 buff with MF cloth wax using Canuba Wax buff with MF cloth seal the rims AG Trye Dress the tyres PB Bold N Bright for bottom splitter, wing mirror base plates, sun roof edging and aerial AG glass polish for all glass including lights and mirrors have a cup of tea |
sounds good mate!! just gettin the weather for i unless you have a garage!!..........after that it will be:drink: :drink: :drink: lol not tea
|
if claying dont bother drying the car before hand
you gonna tape up? replace tea with beer |
sounds a good plan:y:
|
no need 2 wash again after clayin either if ur gonna polish afterwards either in my opion!
|
Quote:
Quote:
You will be left with lots of smears and clay residue if not lol Tea and then beer :y: |
Quote:
|
Soak in Maxi Suds using Spray adaptor on end of hose pipe - Leave for 5 minutes, let the foam do it's job and allow it too drag the dirty off the car.
Soak wheels in a wheel cleaner if you have one, leave per instructions. Soak Arches in a de-greaser and leave for 5-10 minutes rinse wash with maxi suds using wash mitt and 2 bucket method Rinse car down clay if needed with Megs clay kit Rinse and Wash and Dry - After this all possible dirt is going to be off. tape up all black bits such as splitter, window seals, sun roof, etc..... |
| All times are GMT. The time now is 18:16. |
Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.