![]() |
195 tyres on a vtr 185 rim
is this ok to do?
so would it be possible to put 195/50/14 tyres on? or would not work and therefore get toyo proxes cf-1? *EDIT* the question is actually will a 195 tyre fit a vtr 185 standard wheel? |
i wouldnt have thought so seens as 1 is a 185/55/14 and the tyres you want to use are 195/55/15's
|
i just wondered it after reading a thread from last year about it, but there wasnt really a definate answer to it!
il edit this post once i find it again. heres another i jus found so i can actually find a 14" proxes t1-r again not a secured answer. http://www.saxperience.com/forum/sho...5+vtr+tyre+195 il find the one im onabout too |
you wouldnt be able to fit 15" tyres to 14" wheels are it wont seal
|
195/50/14's will go on a standard 14' vtr wheel, if you can find them, they re a very odd size. As long as thesize of the rim is the saame as tyre (14' tyre on a 14' rim, not 15' tyre on a 14' rim) it will go, you could almost have anything you wanted really.
|
Quote:
Has anyone tried this? Will the 195 tyre over hang as its a 185 wheel? any pics if possible, and is it safe? |
You can fit a 195 tyre yes. I don't know if you could get away with 195/55/14 but its a lot easier to find than 50's.
|
Quote:
|
Quote:
Quote:
|
195/55/14's will be fine, they will be 10mm wider and the sidewall will be a slight bit higher aswell, but there won't be a mega diffierence.
|
Quote:
|
case not closed.
you can put 195/45/14's on vtr alloys. nice low porfile, will look good and handle well if you go for some toyo T1R's |
really? i would have thought it would look daft such a low profile on a tiny wheel!
id need to have the car lowered to get away with it looks wise imo Can someone do this please? i wanna see it before i do it. |
Quote:
steels, it is fine. it also decreases the rolling radius, hence marginal better acceleration. Less tyre wall means marginally better handling due to less flex in the tyre. |
Quote:
|
Quote:
and here is a link to the cheapest tyres on the net in that size :y: http://www.camskill.co.uk/products.php?plid=m4b0s307p0 |
Quote:
|
I just had some 195's fitted on a 6½" rim, and its JUST inside the arch.. the rim is about 1 mm from the back arm.. REALLY close.. the alloys have 15 in offset.. So i really depends on the offset of ur alloy/rim
|
All times are GMT. The time now is 11:11. |
Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.