Painting VTR Kit
 

hi can any1 let me know what id need and how hard it would be to paint a vtr kit its on the car atm and in silver looking to paint it black :D

Depends on your equipment, experience, and time.

what equipment ??
no expierience lol
unlimited time :D:D

unlimited time means time to learn. take your bodykit off to spray it makes it alot easier and do it in a dry dust free area with no wind. and just make sure you get the preparation right.

planing and preparation prevent poor piss performance

Best thing to do mate go scrap yard and get any old body pannel and practice

Sand paper, Wet&dry, Primer, laquer, paint, and tape (if your not doing the bump strips


Sand Down
Prime
Sand down
Prime
Sand down
Prime
You may wish to use very fine wet&dry here

Each time you sand down use a lighter grain of sand paper (less ruff)

Apply coat one of silver
Wet & Dry
Coat two of silver
very very fine wet & dry
Coat three of silver

Allow to try once happy apply two or three layers of laquer...

Think thats about it...Try do it in a dust free area and take your time as to get the best finish...

Hope thats helpful

Get some picture up when its done mate! See how you done... good luck