Sorry it's not a Saxo, but you'll forgive me when you see what it is..
 

A friend of mine had a Skyline shipped over from Japan.
Engine was race-spec'd with almost standard bodywork etc.
Has spent ALOT of dollar on it. As you will see in the spec list :P
Thought you guys would appreciate it being petrolheads.

Here's a Spec list:

SPEC

New N1 24U Block
HKS step 2 forged pistons 87mm 21pin
HKS step 2 camshaft IN 264 lift 10.00 EX 272 lift 10.20
HKS H section conrod
HKS 1.4 mm head gasket
New balanced crankshaft
Flowed cylinder head
Dummy head equipped boring
Phosphorus bronze valve guides
TOMEI valve springs
TRUST oil pump
TRUST deep sump extension
GARAGE ITO original oil catch tank
NISMO strengthening engine mount
TRUST 16 step type oil coolers X 2

SARD 1000cc injectors
JUN AUTO MECHANIC fuel delivery pipe
BOSCH twin 044 fuel pumps
NISMO in tank fuel pump
NISMO fuel pressure regulator
GARAGE ITO original fuel collector tank
EARLS fuel lines

TRUST TD-06 20G turbos X 2
HKS 3 layer GT intercooler
GARAGE ITO one off intercooler piping
GARAGE ITO original side tank type 3 aluminium radiator
GARAGE ITO one off additional sub radiator mounted in front left bumper
With electric fan
TRUST front pipe
TRUST TR evolution muffler
TRUST racing blow off valve R type
TRUST type C waste gate
EVC in car control valve

OHLINS coilover suspension
NISMO bush kit
NISMO N1 front extended 8mm lower arm
GARAGE ITO original pillow ball tension rod


OS GIKEN 3 gear kit
OS GIKEN centre plate
OS GIKEN RC3 clutch
HOLLINGER input shaft
New oem 5th gear
All supplied and fitted last week by RB MOTORSPORT

ALCON 4 piston front callipers
356mm discs
ALCON 2 piston rear caliper
315mm discs
EARLS brake lines

APEX POWER-FC CPU
Z32 air flow meters X 2
Mapped by Rob at TR RACING

RECARO SR seats on genuine RECARO japan rails
SABELT 4 point harness
MOMO 80 steering wheel
TRUST boost,egt,fuel pressure gauge
BLITZ boost controller

RAYS ENGINEERING wheels
CE 28 N 19 X 9.5 ET 12
YOKOHAMA tyres

AUTO SELECT splitter
AUTO SELECT carbon canards
AUTO SELECT polished strut brace
NISMO genuine 400R side skirts
AEROCATCH bonnet pins
Carbon exhaust surround

Car made 830 wheel horsepower at 1.7 bar.











Enjoy.

Thats a beast right there, but obviously not fast as a cammed vts with breathing mods. :p

needs vts rims

i hate your freind lol, awsome piece of kit, could do with a dump vavle simulator and some go faster stripes lol

Jesus christ that is insane! Looks nuts mate - what sort of performance is it?

looks amazing

so its quite nippy then yeh? :y:

needs lowering

Love it, engine bay looks insane. Must be rapid.

:fcuk::fcuk::fcuk: that is verrry nice wouldnt mind a drive of that ;)

SPEC

New N1 24U Block
HKS step 2 forged pistons 87mm 21pin
HKS step 2 camshaft IN 264 lift 10.00 EX 272 lift 10.20
HKS H section conrod
HKS 1.4 mm head gasket
New balanced crankshaft
Flowed cylinder head
Dummy head equipped boring
Phosphorus bronze valve guides
TOMEI valve springs
TRUST oil pump
TRUST deep sump extension
GARAGE ITO original oil catch tank
NISMO strengthening engine mount
TRUST 16 step type oil coolers X 2

SARD 1000cc injectors
JUN AUTO MECHANIC fuel delivery pipe
BOSCH twin 044 fuel pumps
NISMO in tank fuel pump
NISMO fuel pressure regulator
GARAGE ITO original fuel collector tank
EARLS fuel lines

TRUST TD-06 20G turbos X 2
HKS 3 layer GT intercooler
GARAGE ITO one off intercooler piping
GARAGE ITO original side tank type 3 aluminium radiator
GARAGE ITO one off additional sub radiator mounted in front left bumper
With electric fan
TRUST front pipe
TRUST TR evolution muffler
TRUST racing blow off valve R type
TRUST type C waste gate
EVC in car control valve

OHLINS coilover suspension
NISMO bush kit
NISMO N1 front extended 8mm lower arm
GARAGE ITO original pillow ball tension rod


OS GIKEN 3 gear kit
OS GIKEN centre plate
OS GIKEN RC3 clutch
HOLLINGER input shaft
New oem 5th gear
All supplied and fitted last week by RB MOTORSPORT

ALCON 4 piston front callipers
356mm discs
ALCON 2 piston rear caliper
315mm discs
EARLS brake lines

APEX POWER-FC CPU
Z32 air flow meters X 2
Mapped by Rob at TR RACING

RECARO SR seats on genuine RECARO japan rails
SABELT 4 point harness
MOMO 80 steering wheel
TRUST boost,egt,fuel pressure gauge
BLITZ boost controller

RAYS ENGINEERING wheels
CE 28 N 19 X 9.5 ET 12
YOKOHAMA tyres

AUTO SELECT splitter
AUTO SELECT carbon canards
AUTO SELECT polished strut brace
NISMO genuine 400R side skirts
AEROCATCH bonnet pins
Carbon exhaust surround

Car made 830 wheel horsepower at 1.7 bar.


.. Just a guess.

i was waiting for this of someone haha.

truly mint mate

want it!
:y:

love that engine :y:

om nom nom nom :D

WOW:panic:

i would just love 830bhp under my right foot

part ex for a vts? ;) lol

woww, but would look nicer without all the stickers i think!

Oh I love skylines :P
That things ia beautiful!
And the purple engine is just the icing on the cake lol
How old is your friend, how much did it cost him and wtf does he do for a living hehe

Bet that shifts!

Performance wise. Dunno if you can see but on the back windows.... 200MPH Club stickers LOL!! Put it that way. Numerous times. Was 7Mph short of it today with sooo many more revs to play with LOL! Easily Mid 10's Standing quarter. It might be at Run What Ya Brung in a couple of weeks.

Alot of people have said that. But in the flesh just looks like a raw race car. Without the sticker it would be pretty bland compared to it now.

Ermm. Numbers i do not know. It came from a racing company in Japan. But never raced. Spent Alot on Exterior engine etc. Wheels alone cost 2k without tyres. My old man sorted out the tyres for him and they were 900 quid discounted LOL!! He is a pro golfer. On the Asian Tour.