Newmans Ph3 Cams, i need some info
 

Hi guys
just going to purshase my Newmans PH3 cams for my VTS

was wondering

What are the valve, inlet and outlet clearences are?

what gains will i be looking at?

What else would i require to Fit cams i'e will i need pullys aswell?

No map - 10bhp ish - With the usual shit (exhaust etc)
Mapped - 30bhp ish - With the usual shit



To fit cams you need;

Cams
Cam Seals
Cam Lube

cheers mate :)

does the cam seals come with the cams or will i need to buy them seperate?

standard pulleys are adjustable so you wont need to change them

buy them seperate - gsf/eurocarparts or citroen

dont need cam lube with newman cams, as they are covered already, also they dont need running in as such, just about 25 miles are smooth driving,

also would say get new followers, and new cambelt and also do a ssrvices!!!

andy

also if it was me i would do the full job, like do the whole head!

headgasket change, new water pump!!

new ilder and tersioner

all the general service parts, just to be on the safe side.

andy

running in camshafts is around 15-20 minutes at 2-3k rpm - from reading this hardens the camshaft lobes so that they wear consistently and last long.

anyone know if 16v saxo cams would fit a 16v c2 engine?

The cam lobes are slightly different offsets to each other - you can get ones to fit the jp4 head though.

Ring catcam/QEP and they'll sort them out for you.

Thanks for all the info guys

I have got a piper cambelt
and i will be doing a full service aswell
i will text the guy tomoro for a new water pump