VTR Engine Cammed
 

Hey guys/girls.. as some of you may know my engine in my VTR is shot.. hence reason i bought it as getting a 2nd hand 1 to replace it so when the old 1 is out i'm going to rebuild it from the block up but as a track engine! Uprated parts!!

But as i'm not a modifer for engine i just like the car to look ok and thats me sorted lol

I'ma mechanic anyway

but was after some ideas from you guys on what should get and upgrade!!!

any ideas welcome!!

Depends on your budget mate, and how far you want to go with it.

Cheapest option would be s1 rallye head,cams,management,inlet a VTR should run at 120bhp all day with that set up,

if you never intend to go turbo then Whislt your rebuilding the engine you should get the bottom end lightend and balanced (Not just the Flywheel as the gain on just the flywheel is minimul) get your crank and rods lightend and polished up (Dont worry about pistons thats going a long way out of your depth on a trackday/weekend fun car)

if you realy have some brass to spend get the head ported and polished, this is proven to tbe the best breather mod.


after that its Bigger cam and standalone easy map management like supersquirt or somthing similar, which in the long run will allow you to run bodies..

An extra 8valves?!

Could get some headwork down? Forged pistons? Lightened flywheel and crank? Depends if your staying na

not going turbo'd had the turbo car in the past done that lol after just a laugh and a sleeper car on the road and a fun car on the track!!

As said it depends, i stayed 8v for the simple fact of motorsport i needed low end grunt, and the 8v engine offers all that to me.

but £ per BHP the 16v option is always the best, the only thing thats more expensive is the Cams themselvs as an upgrade, Manifolds,exhaust,inlets,bodies, management are all the same cost wether 8v or 16v that is definatly to be considered

Best thing is to drop vts lump in...........16v.........:y:

whack sum R1 carbs in it.. 1.1/1.4 gearbox.. pipercross induction kit.. 421 mannifold.. wud wipe the floor off any vts m8.. revs up to about 8000 wud be mental.. ive got 1,4 gearbox in my vtr and in 1st and 2nd it flies.. goin for the 421 next then guna go for the bike carbs

its just a car that is a sleeper on the road and just all out laugh on the track!!

so if open the bonnet at a meet it looks like a standard VTR engine expect the induction kit n the variuos engine bay addons n its clean but inside the engine where u cant c the fun and bhp's wanna get out and say look at me!!!

eh how will this fit if its running carbs???