induction / air filter
 

ok i have a 1.0

i want to put a induction kit maybe if i can find one cheap
and defoo want to put a air filter on
do not want to spend more than 100

this my engine



could any 1 show me what i would need for my engine lay out cos its not the same as my friends 1.1
as said i have 100 budget and have no idea about induction kits

any help would be gratly apprecaited

EDIT :::

only just noticed the pic is back to front ( the rights on the left and the left on the right) lol
thats probly cos i took it with the webcam on the laptop lol

So what do you want, an air filter or an induction kit? lol

as i said i have no idea whats waht with these two so im guessing u cant have both lmao

You can't have both lol

Open Air filter = Noise

Induction Kit = Performance

For an 1.0L you would be safer off with an open air filter tbh.

an induction kit is your best bet i would go with this one

http://cgi.ebay.co.uk/K-N-57I-INDUCT...ht_1258wt_1165

You will see next to no increase in performance with an induction kit on a 1.0L

For the price you would be safer off settling with a cheap air filter.

in my opinion you might aswell get one from argos, it will make a difference to the noise

For a 1.0 I would just put a cheap universal on there.
For example;

http://cgi.ebay.co.uk/PERFORMANCE-IN...item2a05646ced

or

http://cgi.ebay.co.uk/CONICAL-AIR-FI...item3efcf73d5e

actually save your cash i have a furio 1.4 and bought a k&n 57-i and felt no difference beetween them my car used to do 50 mile to a fiver now its down to 35 mile and i dont drive like a d*ck.

i agree ^^^

ill just buy a air filter then
what could i do to the engine to neaten it up a little then
and i will eventually be putting a strut brace on

well one thing is to just go all out and clean the bay up thats the best place to start then paint the rocker cover and with the air filter and strut brace it would look good enough dont waste too much money on the 1.1 engine tho, when i had my first car 1.3 fiesta i spent a bit fitting zetec s bumpers/alloys lowering springs but i dont think i ever even cleaned my engine bay definitely didnt buy anything to make it look better just didnt see the point, your first car should look nice without spending shit loads of money on "performance bits" that wont do anything

I cleaned my engine bay with WD-40, works a treat. Then i put an ECU cover on to neaten it up a little as mine is a mk2. Then if you want to take it furthur, you can paint the rocker cover, add a strut brace and polish up metal components.

i just got a cheap BIG air filter off ebay for like £10 then just put a decent cold air feed on it , works a treat and only cost like 17 quid

+1

Just go with the one in the link above, will sound really nice :)

just buy a K&N silter for your motor, you will notice a cool noise and a little improvement

FILTER, goddamn fingers will work for me one day

i dont mean clean it lol imean tidy the egine bay looks a mess lol
like neaten it up abit ...
so probly induction kit ..

http://media.photobucket.com/image/s...Photo-0063.jpg

how much would this induction kit be and would it fit my 1.0
because it looks alot tidier
will get one of these if they fit and are cheaper than my £100 budget

any one

No it won't fit your 1.0, that is for 1.4/1.6 saxo engines, your throttle body is virtical so it won't fit.