ashley exhaust fitting.
 

Hi there got an ashley race exhaust today. Got the centre pipe on and trying todo the backbox, what way round do the clamps need to go as everyway I try it's almost touching the floor really crappy. How do I make it sit higher?

Cheers phil

how low is your car ? you might need new rubbers on or just ask were you got it from how to fit it. put a picture on here then we can see.

hello mate i done mine the other day and sits really well. i went to halfrauds and got some different rubbers which helped alot and you have to rotate the box as they are dead straight so will go up and down with a twist

Do you have any pics what way the clamps should go? So your saying fit it and then push the backbox up with the clamps loose and then tighten.

got ones simular to these but have round holes instead so fits really well on the hangers sorted mine out really well mate

http://www.halfords.com/webapp/wcs/s...egoryId_165660

ok one clamp is longer yeah? the longer one goes closer to the wheel with the shorter one closer to the spare wheel cage

Cheers mate, thats atleast sorting it a bit!!

thats how mine sat mate took a bit of time ut got it hanging well and i would advise u to get those rubbers as they made alot of difference

bend the hangers

u cnt bend them as there is a cross brace bit on the hanger and if u do it will flex like fuck without it

mate how long did it take you to do that cut out??
looks a very neat and tidy job :y:

well cus i work out on site we have loads of wood hole cutters so took my car in quickly and used it took about 2mins :)

Bent mine fine.

oh ok mate my mate tried to bend his and it snapped the weld on the cross brace and now just bounces around everywhere

Ill post a pic soon!

sweet pal
ive got some hole cutters
wat size did you use??

erm 4 inch mate but if you have the little recess on ur car atm like all the 1.1's do the take ur time i spent half hour marking it out before going near it with the hole cuter. just make sure u center it really well otherwise you will be pissed off when your exhaust looks like it sits off center

and yeh post a pic mate will be good to see what yours looks like

cheers pal :y:
dont worry il be taking my time lol
ps sorry for the hijack

gooood when you do it because the drill bit goes in the hole cutter i had my drill bit almost at the blttom of the bumper which gave me the half circle and left a really good job if you go to high with it then you will get 3 quater circle