Advice needed
 

Today as i was cleaning my car a friend came over with her type R, after seeing me cleaning she asked if i would have a look at her's and see if i could sort the paint out abit. This is what i managed to do:


Used, Meg's compound, dodo lime prime, then finished with a layer of Dodo blue velvet.

But im convinced i can get better results using my DA. can anyone suggest the best stuff i can use on a black car??. cheers.

ive not used the megs stuff yet but i always seam to get great results out of menzerna polishes

On a Black Honda you probably wont need a Cutting pad/compound and should do ok with a Polishing pad and compound as the paint is quite soft. You could use Menzerna, 3M, Megs take your pic....actually even Lime Prime might have enough cut with a cutting pad, but there are other products you can use to fill, like Poorboys Black Hole, the name gives it awat, for Black cars....

well think giving the list ill stick to what i already use, just involve buffer also.

1* snow foam, wash 2bm, claybar, snow foam and dry
2*buff using Meg's compound
3*Glaze with lime prime
4* general paint seal, think its only like supaguard :/
5* Finish off with a layer or 2 of dodo.

shows good results on my car so will hopefully be the same.

megs compound has good cut but no refinising. buy some menzerna 85

what do you mean by re-finishing ??? like depth ?

i use mezerna final finish its awsome mate

well i told her to go and buy the stuff you have recommended and ill just clean her car whenever she wants. gunna get some full session pics up on here once am done anyways ;). cheers for help guys

making sure the finish is as flat as possible to get the best shine/depth.

Menzerna Final Finish will be all that is needed trust me, i had a NHB EP3 (before i sprayed it yellow lol), the paint on these is mega soft, so easy to inflict damage its unbelievable.

God ill make sure to be very carefull then, black paint loves to show every imperfection .