Headlamp wiring
 

I suppose this comes under styling, seeing as I want to change headlamps!

Basically, whoever installed my angel eyes(previous owner I assume) has done a terrible job and the wiring is.....pretty difficult to make sense of seeing as they've cut wires/changed wires/used different colours!

Well I want some standard headlamps, but the wiring is so near destroyed I was wondering how far back the headlight wiring goes and how hard would it be to put in new wiring for both headlamps?

Main reason for doing this is I want some Hid's and to mod some standard lights and don't want the wiring looking I've Edward scissor hands in there :P

Thanks :)

Its part of the intermediate loom.......bigggggg job. Personally id go to a scrap yard and cut the bits out you need......then solder the wires onto your loom.

I'm presuming its on the ph1 you have listed, when whoever changed the lights over only the sidelight wiring should have been cut the rest should be on normal headlight plugs, i expect the wiring goes straight back to the fusebox, you might get lucky tho and find some multiplugs somewheere

Ah bollocks lol! if it's that big I think the scrappy might be the best idea then :) Thank you......you probably just saved my wiring loom :P was about to go and have a mooch around hehe just hope i can get everything right on it.....i swear whoever did these angel eyes needs a course in cutting wires.....and how to put them back!!

Oh yeah, would have helped if I said which car!It is the phase 1!

If I'm lucky and there are multi plugs....how hard are they to get to and replace? thanks :)