Painting boot floor advices.
 

Hello,would like to paint my boot floor (internal part) quite soon and was wondering what's the best way to do it,don't have access to a spray gun so it will need to be made with rattle cans,was thinking about the Hammerite paint which don't require a primer or anything and it's quicker to use,will it be fine or it's not even worth it for the final result? what you suggest? Thanks.

Would something like this work?

http://www.ebay.co.uk/itm/Ferm-Elect...item5aec5439f3

http://www.hvlpshop.co.uk/Apollo+Spraymate-p-3.html
This got very good reviews from practical classics.

A cheap gun and second hand compressor would cost about the same.

what kind of result are you trying to achieve?

my mate did his in black with rattle cans in a few hours and it looked amazing (sorry marcus) try some rattle cans first and see what you think is my suggestion.

Remember doing my old 106 with Hammerite. Had no problems with that.


Sent from my iPhone using Tapatalk

some one mention my name?

My advice would be to NEVER use Hammerite on a car.

They sell 2k paint in a aerosol so just use that, Rub it all down with 400 paper then use a etch primer on it all then leave to dry for a couple of hours then give a rub over with 600 grit. Use a tack cloth to get rid of dust.

Then spray with the 2k aerosol. Make sure you use a mask because the 2k paint will kill you and is proven to cause cancer.

2k paint is the best option because it is hard as nails, Scratch resistant and has a better finish.

True,will keep that in mind.

The best i can to be honest,don't want it to look like a cheap job,not looking for a professional finish obviously,also,i don't trust much rattle cans to be honest,i think they are fine just for small parts.

Nice,got any pic of it?

http://www.qpaints.co.uk/painting/re...ner-400ml.html

Use something like the above mate just tell them what colour you want.

Why do you want to paint your boot floor? Have you taken the carpet and rear seats out or something?

NA don't think I got any photos of it mate. Looked good for what it was though. Depends what you using it for? Mine was cause I spilt screen wash and oil everywhere! Wanted to protect it so coated it in Hammerite lol.


Sent from my iPhone using Tapatalk

Yes,it looks grey and i would like it to match the color code.

I'm going to use that in the link,what mask shoud i use for this? this one should be enough i think?

http://www.ebay.co.uk/itm/Gerson-2K-...item257c625bfc

Thanks.