Old Citroen Saxo OBD 2 port
 

Hello guys i was searching the internet about my Citroen Saxo obd2 port and it seems its not obd2 compliant. But im not convienced , my saxo has a release date of 25-1-2002 , after a bit of research i found out there's a STN11xx chip out there that replaces the ELM327 (the one i tried and failed to connect to ecu). Does that chip reads this kind of OBD 2 port? I have a picture of it below.

That is obd2 most cheap ebay fault readers should work on that mate.

elm 327 works fine on mine 2002 vts ;)

Well my elm 327 Bluetooth has 3 lights and only the power on is lit when I connect it. Maybe a fuse is missing? The torque app says cannot connect to ECU although the technician can connect his obd 2 scanner. Maybe mine's faulty

elm didnt work with my vts. waste of money.

Ended up buying a £26 quid one off ebay, deletes codes etc etc. Not the best but for the price of it, cant argue.

The obd port has it`s own fuse.