lsd ramps
 

what is the track..(not rally or road racing) setting on plate lsd??

angles rampes??

help!

45/45 normally

Depending on your driving style 30/60 or 30/30 or as above, 45/45 may suit.

45/45 is a good "middle of the road" setting.

I would prefer a 30 degree throttle ramp on track if I was that way orientated, but would like it well behaved on lift-off, so would have either 45 or more likely 60 coast ramp. so 30/60 would be my preference.

Edit to add: I actually have 45/45 as it's an off the shelf setting - but I have a road car not a track car.

30/60 setting is more of a rally stage setting, on the track it would bang in and not drive well at all, ashley taylor i believe it was i was talking to about ramp rates and he was saying about a 205 he drove at cadwell with a 30/60 ramp and it come in like a 125 express

Yeah 30 is aggressive for sure but on throttle and on track I'd have thought it would be ok - be more concerned with the coast ramp. (Remember: I'm purely speculating as I don't drive on track!).

What I can tell you is when I got my diff first fitted it was specc'd completely incorrectly for the car (not by me I might add...) and was 30/30. On a road car was a fucking nightmare...

mine saxo is full oriented track only car....race slicks ...and stiff as hell...

so 30/60 or 45/45 ??

maybe 30/60 will be my choice!! opinions please!!??

I think you would find 45/45 the ideal setup. Maybe email Dave Mac Propshafts (who make the gripper diff) and ask their advice for your situation?

thanks but will not buy a gripper diff....

i will buy it from http://www.rmc.com.pt.

.....less expensive here and easy to get it fixed if any major problem comes by....

but in general its a plate diff...ist a copy off citroen sport ones....

thanks anyway ross...

done ..

its chosen .....wiil be 30/60 and zero pre-load.

Ok! I hope your happy with it. If you don't like it, it's no real hassle to change plates. :)

rcm lsd
 

nice...

I have tranx not used it yet but asked to be set up for circuit use and has 4545.

crown wheel pushed on or bolted?

its a bolted one!!

hi...

i whouldlike to know what "vavoline" grade to use whith this one.

lsd specific?

please help.

its firstime ill use it, dont want to ruin it.

give the manufacturer or your dealer a ring.