Saxperience - Citroen Saxo Forum

Saxperience - Citroen Saxo Forum (http://www.saxperience.com/forum/index.php)
-   Saxo Problems & Queries (http://www.saxperience.com/forum/forumdisplay.php?f=13)
-   -   Rear Wiper Relay Upgrade? (http://www.saxperience.com/forum/showthread.php?t=476045)

Jeepster 20th August 2019 12:20

Rear Wiper Relay Upgrade?
 
Hi all,

I read somewhere that the annoying 'constantly on' rear wiper on Saxo's can be modified to an intermittent sweep, by replacing the constant relay with a relay from a different car (I can't remember which make or model though).

Has anyone done this upgrade and can you tell know how to do it? My car is a Saxo Forte 1.1. X,SX by the way.

Many thanks, John.

welshpug 20th August 2019 13:07

I believe you just swap it for a front relay

Jeepster 20th August 2019 19:33

I'm sure it was a non-Citroen car, something like the rear wiper relay off a Mk4 Golf, but can't really remember, as I am hoping to only have the intermittent setting, as a constant wiper on the rear is pointless unless you're going everywhere backwards!!http://www.saxperience.com/forum/ima...ons/icon10.gif

Jeepster 21st August 2019 11:55

Found it
 
Apparently the pin configuration of the VW relays is compatible with Saxo's and it lets you programme the intermittent interval between wipes. So I'll probably heads to a scrapyard / eBay and try to find one and will report back to say if it works.

I found these posts on a VW forum:
___________
My mother has the programmable relay in her mk3, the part number is 357 355 531. In looking around, it seems that the part has been made by Bosch, Hella and Dineco, with each having their own number for it, but the good thing is that the relays seem to have been used in several different car makes, which should make it even easier to find it at the yard. It's been used in Opels, Saabs and probably some other ones... I tried her relay in my mk2, and it works perfectly, so this is the part you're looking for...
From what I’ve found, the part numbers seem to be:
Bosch: 0 986 335 058 (EasyTronic)
Kostal: 377 955 531
VAG stamp their relays, and the programmable one is stamped 99, whereas the non-programmable one is usually 19...
___________
To programme it push the wiper to the intermittent setting, then switch it back to the off position.
to set the cycle you just turn it back on again, and however long passed between turning it off to back on, that's how long between wipes.
___________
VAG relay number:
19 = front wiper intermittant relay
99 = front wiper variable (programmable) intermittant relay


All times are GMT. The time now is 13:24.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.