Quote:
Originally Posted by Topbombingkid
Ok if all three of the above have stopped working this is what you do.
Remove the steering column cover (held on by 2 torx) and under the steering column is a light brown plastic connector with 2 red wires going in the right side and 2 brown wires coming out the left side.
Cut the 2 brown wires and join them together. Make sure you solder the wires or use a proper crimp connector and make sure u use insulation tape to cover it. and tape up the 2 lose ends of the brown wires.
 |
hi i also have the same problem it was working fine 1 minute and then all 3 gone and battery warning light also appeared! is this part of the problem did this happen to yours if not what else could it be the altenator is still working and belt is fine can you help please ta