Quote:
Originally Posted by Topbombingkid
Ok if all three of the above have stopped working this is what you do.
Remove the steering column cover (held on by 2 torx) and under the steering column is a light brown plastic connector with 2 red wires going in the right side and 2 brown wires coming out the left side.
Cut the 2 brown wires and join them together. Make sure you solder the wires or use a proper crimp connector and make sure u use insulation tape to cover it. and tape up the 2 lose ends of the brown wires.
 |
I am going to opt for this method but first, can i simply cut those wires or do i need to disconnect the battrey?
The other problem i have which has developed out of the blue. I started engine and for no reason the revs shot up to 30 without touching them. They stayed like this till i was in motion where they went back to normal but everytime i depressed the clutch the revs went back to 30 again.
Any ideas please?
Thanks