Quote:
Originally Posted by Topbombingkid
its by passing a switch in the ignition its a common falt on the saxo even citroen do this mod (so ive been told) its this or pay for a new ignition.
|
Quote:
Originally Posted by Topbombingkid
Ok if all three of the above have stopped working this is what you do.
Remove the steering column cover (held on by 2 torx) and under the steering column is a light brown plastic connector with 2 red wires going in the right side and 2 brown wires coming out the left side.
Cut the 2 brown wires and join them together. Make sure you solder the wires or use a proper crimp connector and make sure u use insulation tape to cover it. and tape up the 2 lose ends of the brown wires.
 |
done this trick about 5 month ago and the other day i notice smoke comin from the steering wheel so i took the cover off. the brown wire was red hot and the insulation tape had turn to plastic and was ready to set on fire anybody got any idears about this is this safe
