Sand paper, Wet&dry, Primer, laquer, paint, and tape (if your not doing the bump strips
Sand Down
Prime
Sand down
Prime
Sand down
Prime
You may wish to use very fine wet&dry here
Each time you sand down use a lighter grain of sand paper (less ruff)
Apply coat one of silver
Wet & Dry
Coat two of silver
very very fine wet & dry
Coat three of silver
Allow to try once happy apply two or three layers of laquer...
Think thats about it...Try do it in a dust free area and take your time as to get the best finish...
Hope thats helpful
__________________
Quote:
Originally Posted by Aly
Sam there's not a day goes by where I sniff the seat for after smell of your arse
|
Last edited by SamW; 22nd May 2009 at 16:05.
|