[sexoturbs]

Originally Posted by jsdvtr

Is this the boost pipes i need or 3'' ones?

http://cgi.ebay.co.uk/2-5-TURBO-INTE...d=p3286.c0.m14

Looking at a intercooler like this but the inlets are 2.25'' not 2.5'' and its not too big, seems perfect sort of size for low boost.

http://cgi.ebay.co.uk/Alloy-Front-Mo...d=p3286.c0.m14

I think going for a t25 turbo.
Can i buy any dump valve as long as get the t piece of the same car as what dump vavles for?
What bar map sensor should i get, etc.
Im buying a mf2 with 5th injector as going to be using that for time being.

intercooler will be ok, make sure you measure up. saxos are restricted for space which you will soon find out.

im not to sure about them pipe kits as the saxo is restricted for space so you will find half the kit wont be needed. if you mount the intercooler then take it to a company close to you they should be able to measure it up for you and give you what you need.