Quote:
Originally Posted by grandpacharli
iv done a vts convertion on my vtr 52 plate. my set up is and you will need this to fit : vts engine doesnt matter what year, a vtr gearbox beter 0-60 mine 6.4 sec , and a 3 plug ecu and loom and key and imobiliser unit you need them for it to start unless you have got an unlocked ecu. that is what i needed for my mk2 52 plate with a 02 plate vts lump. now for the expensis . engine 38000miles: £450 wiring loom: £20 ecu,key,imobiliser: £150 . my main isues have bin the wiring and plug because the plug that connects to the dash wich is the round one by the pasenger side headlight didnt fit with a single plug ecu so i had to change the loom and that ment changine the ecu to ! so i do have a single plug vts ecu and imobiliser and key all you need is an engine. give us a shout if you need anythin more good luck
|
ive got a mk2 vtr and a phase 3 vts engine. ive got an unlocked ecu and ive been told that if i get a mk1 vts loom it will all fit fine because my car loom has a small single plug. is this right?