Quote:
Originally Posted by vtrlogan
the hole system will have a certain persure with the hole, will stop you from blowing pipes if over filled, and also let the water get out if over filled, shouldnt leak 1 bit if filled correctly  |
I guess I filled it up too much then. I'm sure the water level of my old VTS rad was usually right near the top so I did the same with this one...
Quote:
Originally Posted by raunchz
I was under the impression the cap took care of the pressure in the system ?
I agree with the others though, just looks like an overflow hole? OR pressure hole
|
Ah, thats good to hear, seems like it's nothing to worry about then.
Quote:
Originally Posted by Meto
I would guess at it being a pressure release like said. On my standard radiator the max line is nowhere near the top, so even when the water expands when hot, the water shouldn't be near the top. But I don't know where the max line is on a nissens.
So I don't think any water would leak out when driving, as its only a small hole.
|
I'm sure the max line will be the same on a Nissens to a standard? I'll go outside and have a look in a min. I guess I just filled it up too far! I am just worried that when the water gets hot it's going to run up the tube and spray out into the bay!
Cheers for the input guys
